Comgrow Creality Ender 3 3D Printer Aluminum Prusa i3 DIY with Resume Print 220x220x250mm


Modeling Technology:FDM (Fused Deposition Modeling)
Printing Size:220*220*250mm
Machine Size:440*410*465mm
Package weight:8.6kg
Max Traveling Speed:180mm/s
Filament:1.75mm PLA
Input:AC 100-265V 50-60Hz
Output:DC 24V 15A 360W
Layer Thickness:0.1-0.4mm
Nozzle diameter:0.4mm
Precision:±0.1mm
File Format:STL,OBJ,G-Code
Working Mode:Online or SD offline
Max Nozzle Temperature:255℃
Max Hot bed Temperature:110℃
Resume print after power off: Yes

[sg_popup id=3]

Product Features

  • Resume Print: Ender 3 has the ability to resume prints even after a power outage or lapse occurs
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 15 minutes to assemble 20 nuts well.
  • Patent Technology : MK-10 Extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheel make it move noiseless, smoothly and durable
  • Safety protected Power supply, Only need 5 minutes for hotbed to reach 110℃
  • Strict Test: Strict testing for key components before delivery and life-time technical support

Click Here For More Information

3 comments

  • Washington State

    Skip this printer until they quality control the print bed. Bed is warped. Bowed downwards in the middle. It simply cannot be adequately leveled.If you try and level it at the corners, the middle is too low. If you try and level it at the middle the hot end scrapes the bed when homing.Must heat PLA to 200c in order to get it to stick, due to the warped bed, which ends up causing lots of very fine stringing. Small fibers that go from part to part.This printer has the potential to be a great one. I like how easy it is…

  • B. Hodges

    Great printer but be wary of cheap china parts. This printer requires a little work to get up and running but once you dial it in it is a champ. I didn’t bother using the filament that came with the printer but instead printed with . This seemed to work pretty well once i set the temps higher. The instructions that came with the printer were not 100% clear but definitely useful, there are also a few…

Leave a Reply to B. Hodges Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.