SainSmart 1.75mm PVA Dissolvable 3D Printers Filament -0.5kg/1.1lbs (Natural)

SainSmart 3D Printer Filament

* SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.
* This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
* The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!


* PVA is a water-soluble synthetic polymer.
* PVA is degradable and dissolves quickly in water.
* It is the perfect filament to use as support material for it’s dissolvable properties.
* Generally, PVA is used in conjunction with PLA not ABS because it adheres well to PLA.The extrusion temperature difference can also be problematic with ABS.
* Importantly, PVA should not be allowed to sit at temperatures higher than 200°C for an extended period of time, known as pyrolysis, it will form jams which are extremely difficult to remove.
* Unlike PLA and ABS, you cannot remove the jam by increasing the temperature.
* Clearing the jam in the nozzle will often require it to be re-drilled or replaced altogether, so be careful!

Compatible 3D Printers:
All FDM 3D Printers
• PIXMA MG5420
• Replicator 2
• Ultimaker 1
• RepRap
• Replicator 2x
• Prusa i3
• Mendel Prusa
• Ultimaker 2
• Replicator
• Print/bot
• Leapfrog Creatr
• Zcorp
• Solidoodle
• UP! Plus
• Form 1
• Cube X
• Up! Mini
• Creator
• Mende!Max
• uPrint
• PowerWasp
• Dimension
• Lulzbot
• Felix 2.0


Let’s See How PVA Support:

Product Features

  • 0.5 KG (approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PVA 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 160°C – 180°C (320°F – 356°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

2 Replies to “SainSmart 1.75mm PVA Dissolvable 3D Printers Filament -0.5kg/1.1lbs (Natural)”

  1. Works great. Note printing temperature requirements This was a great discovery for me. I have been able to print parts using the PVA filament as support, and it dissolves in warm water just as advertised. One caveat however – one reviewer cautioned against using the recommended temperature of 190 degrees and claimed that it would clog the nozzles at that temperature. I think that is a temperature calibration issue. Being cautious, I used his recommendation of 160 degrees and found that the filament wasn’t melting and nothing came out. When…

  2. The Perfect Support Material For Me Easiest and best support material possible for my use case. Prints with a strange webby consistency (maybe that’s a temperature thing – I’m still tweaking) – but I am ecstatic over this material. Dissolves *completely* in water at room temperature. I take my prints and dump them into a large plastic container filled with water. In a couple hours, it’s like this stuff never even existed.I print lots of items with very small internal channels that often require support material…

Leave a Reply