Aluoflower TMC2100 Stepper Motor Driver Super Silence Module Heat Sink for 3D Printer Parts


Description:

Features:
100% brand new and high quality.
Drive current algorithm and regulation.
1. drive current algorithm: i=Vref*1.9/2.5, the default Vref about 0.65v, so the default current 0.5A, the maximum current 1A
2. Vref measurement of Gnd and potentiometer intermediate voltage.
3. Don’t connect to the motor when measuring voltage, otherwise it is easy to burn the drivers.
4. the measurement of the voltage should be switched on. Don’t just connect the USB power supply.
Attention: please put TMC2100 drivers in the correct direction on the board.

Use of the TMC2100 drive module:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Please pay attention to direction.
3. The heat sink directly attached to the PCB.
4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988.
And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.

Specifications:
Name: TMC2100 Stepper Motor Driver
Color: White + Blue
Size: 2×1.5×1.2cm / 0.79×0.59×0.47in (Approx.)
Heat Sink size: 1.2×0.9×1.2cm/0.47×0.35×0.47in (Approx.)
Application: 3D printing
Quantity: 1PC (other accessories demo in the picture is not included)

Package includes:
1 X TMC2100 Stepper Module With Heat Sink

Product Features

  • 100% brand new and high quality.
  • Super silence in working.
  • Drive current algorithm: i=Vref*1.9/2.5, the default Vref about 0.65v, the default current 0.5A, the maximum current 1A
  • Size: 2×1.5×1.2cm / 0.79×0.59×0.47in (Approx.)
  • Heat Sink size: 1.2×0.9×1.2cm/0.47×0.35×0.47in

Visit The Website For More Information…

Wangdd22 3D Printer Parts 100Kohm NTC3950 Thermistors with Cable for 3D Printer Reprap Mend RAMPS 1.4 A4988 MK2B Heatbed(Pack of 10)

Specifications:

Negative temperature coefficient (NTC) thermistor
R @ 25: K100K-1%B25 / 50: K3950-1%
Element: thermistor type MJB2

Characteristics:

Resistance value: R (25 ° C) = 100K ± 1%
Resistance tolerance:± 1%
B value R25/50:3950k
Operating temperature range:-40° C ~+ 300 ° C
Temperature coefficient of resistance:-2 ~ -5% ° C
Maximum rated power:45mW
Dissipation power coefficient:>5mW/° C
Thermal time constant:≤7S

Colour:Milky white
Line length:1m

Package Includes:
10Pcs 100K temperature sensor

Product Features

  • High sensitivity and quick response;
  • Compact structure, easy installation;
  • Wide temperature range, good stability, high reliability;
  • Teflon wire is twice thicker than other similar products in the market. It is not easy to be break off;
  • It adopts white high temperature Teflon wire, resistant to high temperatureof 200 degrees;

Visit The Website For More Information…

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts ?�? Metal Set 1

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts Metal Set 1 Included: 4 x ARCL_S Nylon 12 x Oilless bushing (4x8x8) 6 x Bearing (3x9x5) 17 x Nut M3 x 0.5 6 x Spacer HexNut 4.75x6mm-M3 15 x Washer (3x7x0.5) 2 x Linear shaft D4x181mm 2 x Linear shaft D4x131mm 2 x Linear shaft D4x140mm 1 x M3 Thread rod for Z axis 1 x Z rod coupling

Visit The Website For More Information…

Creozone 3D Printer Bed Build Surface, 3D Printer Heated Bed Plate Bed Sheet; 8.42″ x 8.42″ Square; Blue (Pack of 3)

About US

Creozone aims to bring cost-effective 3D printing to personnel and business around the world. With professional industry expertise and innovation, Cerozone provides an excellent user experience by providing easy-to-use equipment and accessories.

Creozone sells including:

3D Printers & 3D Printing Pen

3D Printer Filaments: PLA, ABS, Wood and etc

3D Printer Accessories: Build plate, Mos modole, StepStick Motor Diver Module, and any other parts related to the 3D printer

About Product

The Printed 3D parts will adhere to this surface and you can take it away after cool down.

HOW TO USE:

There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Long-lasting construction allows Multiple use, For use with FDM 3D printers (sold separately)
  • Compatible with ABS, PLA, wood(or many other materials) filaments (sold separately); Allow to print surface no need additional adhesives or tape
  • Build sheet adheres to a print bed(heatbed) to help the filament stick during printing and easy clean removal of the printed part afterward
  • Single sheet design(0.8mm )with fewer bubbles than tape or films and installs more quickly on top of existing build platform
  • Notice: We have two version build surface: one is our Creozone LOGO on center; one is CAUTION Icon on center; We will send randomly for you.

Visit The Website For More Information…

1992 3D Printer Patent Print Art Poster UNFRAMED Gray 18″ X 24″

The perfect gift for the “hard to buy for” collector or the centerpiece for your Home, Garage or Man Cave. This 1992 3D Printer Patent Poster measures 18″ X 24″ Unframed – (including a white border) and is printed on 45lb. archival safe, fine art paper. (The use of new archival technologies means these prints are designed to last for decades). FREE SHIPPING IN THE USA! Ships in heavy mailing tube with end-caps via USPS First Class Mail. BUY NOW!……..and purchase a truly unique keepsake gift.

Product Features

  • Perfect for the collector, makes a Great Gift for any Tech enthusiast.
  • Large 18″ X 24″ Print (Unframed)
  • Enhanced reproduction of the original patent art work.
  • Handmade in the USA with the Highest Quality Inks and Papers.
  • FREE SHIPPING IN THE USA! via USPS First Class Mail.

Visit The Website For More Information…