Orion Motor Tech PLA 3D Printer Filament 1.75mm Diameter 1kg 2.2lbs (transparent)

Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results. PLA materials are extruded with great precision, which means better looking prints, less calibration and fewer extruder failures. The materials will work flawlessly with most 3D extruders currently in the market.

Specification:
Material: PLA
Density 1.25g ± 0.05g/cm³
Melting Point: 180℃ (356°F)
Tensile Strength: ≥60MPa
Bending Strength: ≥60MPa
Notch Impack Strength: 4.53 lbs / ft2
Distortion Temperature: 60℃(140°F)
Printing Temperature: 190°C – 220°C (374°F – 428°F )

Product Features

  • Made of PLA (Polylactic Acid) material of premium quality, no kinks or breaks
  • Work flawlessly with most 3D extruders/printers currently in the market
  • Recommended printing temperature is 190°C – 220°C (374°F – 428°F )
  • Superior materials ensure better looking prints, less calibration & fewer extruder failures

Click Here For More Information

Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information

3D Printing Failures: How to Diagnose and Repair All 3D Printing Issues

Whether you are new to 3D printing, or you have dozens of successful prints under your belt, this book is going to help you!
Sean Aranda and David Feeney have hundreds of thousands of successful 3d printing hours combined, so let them help you achieve consistent clean prints.
The failures that are discussed in great detail by chapter are:
• Bed Adhesion
• Build Plate Not Heating
• Build Plate Not Reading Correct Temperature
• Built Up Material in Nozzle
• Extruder Stepper Skipping
• Filament Snapping
• Hotend Can’t Reach or Maintain Temperature
• Hotend Not Heating
• Hotend Not Reading Correct Temperature
• Layer Shifts
• LCD Blank or Dark
• Model Errors
• Not Finding Home
• Nozzle Clogs
• Over Extrusion
• Parts Not Mating Together
• Print Pauses Mid Print
• Running Out of Filament
• Settings Issues
• Stepper Motors Overheating or Malfunctioning
• Stripped Filament
• Unlevelled Build Plate
• Warping
• Z-Axis Wobble
• Z-Height Issues
• And much more!

Click Here For More Information

3D MARS Deep Blue PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen

Welcome to the world of 3D Mars for endless opportunities of innovation and design in 3D printing!

3D MARS Deep Blue Filament extrudes precisely for fast printing and consistent layering.

3D MARS Deep Blue Filament comes with a light spool in a sealed package with a bag of desiccant.

3D MARS Deep Blue Filament’s recommended extrusion temperature is 195°C – 220°C (383°F – 428°F)

3D MARS Deep Blue Filament gives 3d printed objects the look and feel of fiberboard

Product Features

  • *Gross Meter and Weight: Deep Blue3d printer filament are 1.2KG(including spool) with 390 meters
  • *3d Printer Filament 1.75: Eco-friendly Deep Bluefilament is suitable for high precision while printing.
  • *Better Smell: The air is filled with slightly sweet smell likes candy when printing
  • *Compatibility:Deep Bluefilament works well with MakerBot, Ultimaker, 3D Pen, Prusa i3 ect
  • *+/-0.05mm Filament Diameter Tolerances:1.75mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints

Click Here For More Information

2017 Newest High Performance Shining 3D Einstart-S Desktop 3D Printer (Alloy Framework, High Accuracy, Stability and Speed, Large Build Size) – Blue

Shining 3D was founded in 2004 and successfully got listed in OTC stock market on August 8, 2014, becoming China’s first OTC stock in 3D digitizing and 3D printing industry.Einstart-S desktop 3D printer, developed by Shining3D. It is the second generation desktop 3D printer of Shining3D.

Einstart-S is designed for home or research institute use, features in easy operation, unique one-press printing design, meets all the needs of 3D printing. Any user can operate the printer within 10 minutes and print the first 3D model to have fun.

Equipment Dimension(mm) 300*320*390

Build Size(mm) 160*160*160

Printing Accuracy(mm) 0.15-0.35

Print Head Single

Nozzle Diameter(mm) 0.4

Material PLA

inside Breathing Light Yes

Control Software 3D START 1.3(Graphic interface)

Filament Pause-and-chage Yes

Display Screen OLED LCD

Filament Tray Built-in

Printing Speed(cm?/h) 24

Axis Runn

Product Features

  • Easy to use no PC connection needed. Full metal framework ensures high print quality. Pre-assembled.
  • Support .stl file from all design software. Support all 3rd party 1.75mm PLA filament.
  • Non toxic filament, protected print head, safe for open environment usage. No calibration needed.
  • Smart Control Software offers print pause, filament change, temperature/ sprint speed adjust.
  • Comprehensive customer support, Regular Firmware/ control software Upgrade. Mature user community.

Click Here For More Information