Category Archives: 3D Printing Materials

TIANSE Violet Blueviolet PLA 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm

Product Features Material: PLA – Color: Violet Weight: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant 100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice Check Out Our Website For Details…

Read more

Gizmo Dorks 1.75mm HIPS Filament 1kg / 2.2lb for 3D Printers, White

Gizmo DorksWe provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool. HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, HIPS is used with different solvents versus ABS. Limonene is used with HIPS instead of Acetone for ABS. Since […]

Read more

Armadillo Nylon Alternative 3D Printing Filament – 3mm .5kg – SNOW

Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market. Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues. When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes […]

Read more

3D Pen, Zerofire 3D Printing Pen With LCD Screen Display Compatible with PLA ABS Mode Options, Set with 16 Colors 160 Feet 1.75mm Filament Refills for Kids and Adults

Newest Version: Zerofire 3D Printing Pen uses the newest version that brings you better 3D drawing experience, allowing you to make bigger improvements from the old type of 3D pens. The 3D printer pen replaces ink with plastic, which is heated at high temperatures but cools instantly, allowing you to create 3D objects instead of just ideas on paper. You can use the pen to draw in the air, in freehand, on the surface or trace objects on paper.The possibilities are endless and only limited by your […]

Read more

KODAK 3D Printing Filament ABS (Black, 1.75 mm)

ABS is a commonly used filament suitable for making more durable and stronger parts than with PLA, as it can stand higher temperatures, it is slightly more flexible and can be easily painted. It can be treated with Acetone or Acetone vapor to give it a glossy finish (be careful!) and to make the object stronger, or to solidly glue parts together. Use hips as support material for printing ABS. ABS shrinks when it cools so you should use an enclosed printer with warm and steady air […]

Read more
1 2 3 152