EAONE 2 Pcs PTFE Teflon Tube (2 Meters) with 4 Pcs PC4 Fittings for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)

EAONE 2 Pcs 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) with 4 Pcs PC4 Fittings for Reprap 3D Printer 1.75mm J-Head Hotend
Specification of PTFE Teflon Tube

Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3
Heat resistance, up to 260℃
Outside Diameter: 4mm, Inside Diameter: 2mm
Color: White
Length: 2m

Specification of PC4-M10 Fittings:

Material : Copper, Plastic
Thread Diameter : 10mm;Inner Diameter(Blue End) : 4mm
Heat resistance J-head is able to bear greater and stronger impulse but won’t tripping
easy to install and durable
Oval release ring turn 360°freely, convenient to disassemble

Compatibility:Compatible with all 1.75mm V5 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

package including:
2 x 2M PTFE Teflon Tube(2.0mm ID/4.0mm OD)
4 x PC4-M10 Fittings for 4mm OD Tube with M10x1 Threads

Product Features

  • Package include: 2x 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) + 4x PC4-M10 Fittings
  • Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3, heat resistance, it’s temperatures can up to 260℃
  • Size: Length: 2m, Outside Diameter: 4mm, Inside Diameter: 2mm
  • J-head: standard size J-head with turn freely release ring is able to bear greater and stronger impulse but won’t tripping, easy to install and durable
  • Compatibility: Compatible with all 1.75mm E3D V5 Makerbot 3D printer

Visit The Website For More Information…

Plastic & Acrylic Cleaner (lon) for Motorcycle Windshields, Marine Eisenglass, Headlights, Retail Displays, 3D Printers & Hot Tubs/Spas

A unique formulation that instantly cleans & shines ALL nonporous surfaces including: Plastic, Acrylic, Plexiglas, Lexan, Mylar, Polycarbonate, Carbon Fiber, Aluminum, Chrome, Clear coats, Fiberglass, Gel coats, Glass, Stainless Steel Repels dust while helping to protect from fingerprints & scratches Alcohol Free Ammonia Free Antistatic Nonflammable Water, based Not recommended on fabric or suede leather DO NOT use on vehicle controls such as steering wheels, handlebars, throttles, brake/gas pedals, motorcycle/personal watercraft seats, and surfaces critical to safe operation Directions: SHAKE WELL For small areas or electronics, wipe directly onto cloth, lightly covering area For best results, use a clean, dry microfiber cloth Wipe Rolite Plastic & Acrylic Cleaner until residue is removed Turn cloth over to a dry area and lightly buff the surface until all residue disappears Causes slippery surfaces which should be wiped until dry.

Product Features

  • Cleans, shines and protects, unique formulation that instantly cleans & shines ALL nonporous surfaces leaving a smooth, shiny surface
  • Great for: Plastic, Acrylic, Plexiglas, Lexan, Mylar, Polycarbonate, Carbon Fiber, Aluminum, Chrome, Clear coats, Fiberglass, Gel coats, Glass, Stainless Steel and much more
  • Repels dust and protects from fingerprints and scratches, ammonia and alcohol free, antistatic, streak free, non flammable, water based
  • Great for sporting goods, automotive, boats, isinglass, RVs, museums, motorcycles, trade show exhibits, windows/mirrors, countertops (polished), copiers
  • Made in the USA, trusted brand for over 40 years, high performance product preferred by professionals, economy size

Click Here For More Information

3D Pen PLA Filament Refills – 656 Linear Feet 20 Different Colors Include 4 Colors Glow In the Dark, 1.75mm PLA 3D Printing Pen Plastic Tolerance +/-0.02mm

If you are looking for a refill that is eco-friendly and gives your 3d pen the same magic to let you draw multiple things in different colors, then this 3d doodle pen refill is the right product for you.
This 3d pen refills supports 1.75mm of PLA filament. Not only this, it gives you the scope to draw things even in the air.
With its feature of instant cooling of the ink, these filaments do not cause any burn or damage to the 3d pen plastic.

These TRLIFE 3d drawing pen refills have been tested under all severe conditions and by many users and all have given a positive feedback for the product.
This high quality product which uses ultra-smooth technology is compatible with all the leading 3D printer pens.

These amazing 3D pen PLA refills offers the following specifications to their users for their requirements:
•1) Diameter: 1.75mm
•2) Tolerance Level: +/- 0.02 mm
•3) Product lengths: 32.4 feet per color
•4) Product weights: 24.6 ounces
•5) Random 16 colors Options: black, white, super yellow, gray, golden yellow, skin color, pepper red, baby blue, royal blue, etc. It also offers 4 glow colors
•6) Compatibility: All the leading and trendy 3D printers
•7) Temperature Range: 160℃- 220 ℃ (320℉-428°F)

The offered specifications give you an endless scope to explore your imaginations and which means now you don’t have to limit your creativity due to any reason.
★If you are quick with your creativity, then this is a must buy for you. Give wings to all your innovations without any limitations with this amazingly power packed product. ★

Product Features

  • [Non-Toxic and Eco-Friendly]: This 3d doodler refills is made up of corn-starch making it an eco-friendly product. Now, you can give a creative side to your imagination with taking care of the environment as well. All natural odor free PLA 3D pen refill pack, compared to ABS, PLA filament melts at a lower temperature and is safer for kids
  • [HIGH QUALITY]: – The tight tolerance and its ability to perform operations without any jam will let you to bring your dreams into reality without much difficulty. Standardized 1.75mm diameter functions works with all 1.75mm 3D printer pen, dimensional accuracy +/- 0.02 mm
  • [656 LINEAR FEET]: – Every color set in the product measures around 33 feet which totals to around 656 linear feet and which makes this product preferable by artists
  • [20 UNIQUE CHARMING COLORS]: – Choose any color of your choice to paint your fantasy as this 3d printing pen PLA filament comes with 20 different color options along with 4 glow colors
  • [100% SATISFACTION GUARANTEE] : – Experience the total satisfaction level of mirroring the exact copy of your visualization and get a money back option if not satisfied

Check Out Our Website For Details…

QIDI TECHNOLOGY 3D PRINTER New Model : X -pro ,4.3 Inch Touch Screen,Dual Extruder With 2 Spool of Filament,Works With ABS And PLA

Product Description:
X – PRO is a new dual-extruder 3d printer developed according to user requirements, which is applicable to families, schools, 3d printing fans, makers and businesses. .

1 roll of 1kg PLA filament,1 roll of 1kg ABS filament, color randomly selected.
Power cable
USB Pen Drive
Tool box
Filament guide tube

Printing Technology:FDM (Fused Deposition Modeling)
Build Volume: 230 L X 150 W X 150 H mm
Layer Resolution: 100~500 microns
Positioning Precision: 11 microns on X and Y and 2.5 microns on Z
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm

Frame & Body: Metal
Extruder Quantity: TWO
Product Weight: 23 Software: QIDI TECH Software
Operating Systems: Windows 7/ 8 / 10 , Mac OS X
Windows system computer :print via USB Pen Drive ,Ethernet .
Mac OS system computer :Only support print via USB Pen Drive

Voltage: 115V ~ 230 V
Power:100 W

Product Features

  • Software: specifically customized and easy to use QIDI TECH 3d printer software.
  • Removable Build Platform: finished models can be removed easily.
  • 4.3-inch full color touchscreen: user friendly design.
  • Breakpoint Printing : If there is a power outage during the printing process, the printer will automatically save the breakpoint.
  • Turbofan with four sides blowing ,better cooling

Click Here For More Information

Creality MK10 Assembled Extruder Hot End Kit for CR-10 CR-10S S4 S5 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle


– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm


1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle

Please note:

Due to light and screen difference, the color may be slightly different from the pictures.
Please allow 1-5mm deviation due to manual measurement.

Product Features

  • 100% original and high quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 12V 40W
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.

Visit The Website For More Information…