Printrbot Assembled Simple 2013 3D Printer, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume

The Printrbot Simple 3D printer comes fully assembled, has an open platform, a frame constructed of machined aluminum and laser-cut birch wood, and fabricates objects using PLA (polylactic acid) thermoplastic filament, with a vertical resolution of 100 microns (0.10 mm). The printer can build objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D). It comes with a direct drive extruder with a cooling fan, and an Ubis hot end that accepts 1.75 mm PLA filament. The printer is commanded through the provided micro USB cable using G-code numerical control instructions. An SD memory card slot can store G-Code instructions on a memory card (sold separately) for operation without a connection to a computer. It can be used with 3D printer management software packages (sold separately). The frame is made of laser-cut birch wood. Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement. The size 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. The printer comes with a sample spool of PLA filament.

Specifications

Printing materialPLA
Vertical (Z-axis) resolution100 microns (0.10 mm)
Hot endUbis 1.75 mm
Nozzle diameter0.4 mm
Build speed80-100 mm/min
Build volume4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
Printer weight5.25 lb (2.38 kg)
Printer size7 x 8 x 9 inches (H x W x D)
Input formatG-code
Input methodMicro USB cable (included) or SD memory card (sold separately)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

3D printers fabricate physical objects directly from computer-aided-design (CAD) data sources. Objects created by additive manufacturing are built by dispensing successive thin layers of molten material onto a moving platform base from a robotic extruder nozzle. The material is most commonly a thermoplastic or HDPE (high-density polyethylene) filament.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?
  • Printrbot Simple 3D Printer
  • 12v 6A laptop style power supply
  • Power cord
  • USB cable
  • Sample spool of 1.75 mm PLA plastic filament

Product Features

  • Fabricates objects from G-code instructions using PLA thermoplastic filament
  • Open platform for ease of access with machined aluminum and laser-cut birch wood frame construction
  • Builds objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
  • Vertical (Z-axis) resolution of 100 microns (0.10 mm)
  • Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement

Click Here For More Information

IC3D 1.75mm ABS 3D Printing Filament 2lb Green

*** Introductory price! IC3D is now extruding our own filament in-house!*** 100% USA manufactured 1.75mm ABS 3D printing filament. Filament diameter is 1.75mm +/- 0.10mm. Strict production standards for cleanliness and tolerance specification ensure absolute top quality and consistent diameter. Proven results through extensive testing on several mainstream desktop 3D printers utilizing a variety of extruder designs and hot-end styles; we confidently provide every spool of filament with a 100% SATISFACTION GUARANTEE. Recommended printing temperature range is calibrated 220 – 230C. Every spool is quality checked, and sealed with desiccant in a heavy poly-bag to keep your filament clean and dry during storage. IC3D For 3D Printers, By 3D Printers (TM)

Product Features

  • 2lb of 1.75mm ABS Filament
  • Filament comes on a sturdy plastic spool, in a thick vacuum sealed package with desiccant.
  • Filament Diameter is 1.75mm +/-0.10. Filament Weight is 2.1lb +/- 0.1. Printing temperature range is 220 – 230C.
  • Extruded by IC3D Printers in Ohio, USA
  • IC3D only makes product for the 3D printing industry

Check Out Our Website For Details…

RioRand™ 1.75mm PLA Filament 1kg/2.2lb for 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle etc.(Blue)

This RioRand filament is another popular plastic filament for home printingcomes coming with vacuum package, with no oily residue and no air bubbles.
The plastic is great quality, and no kinks or breaks. Best choice for perfect printing.

Features

The diameter of hole is 3.8cm, widespread used in 3D printers such as Reprap,MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2 and UP!(Afinia H-Series).
The diameter stays stable and consistent and filament holds exceptionally toght tolerances.It loads and unloads perfectly.
Widely used in health care, education, toys, building, automobile, electronics, and anime field.

Specification:

Material:PLA
Filament diameter:1.75mm±0.1mm
Printer Temperature:160-220

Tips:

1. Is your filament tangled?
Check that the spool is spinning smoothly on the mount.

2. Is the nozzle clogged?

Run the Load script from the onboard menus. Observe the plastic as it emerges from the nozzle. Does it drop straight down, or curl up toward the extruder? If it curls back up toward the extruder, the nozzle may be partially clogged.

3. Having trouble getting the first layer to stick well?

Some adjustments to the nozzle calibration height help.

Package:

1x RioRand PLA Plastic 3D Printer Dark Blue Supplies Filament Makerbot RepRap 1kg 1.75MM

Product Features

  • Powered by RioRand advanced technology
  • Made of famous material:NatureWorks
  • High precision:the filament extrudes precisely for fast printing and consistent layering.
  • Compatible with DeltaMaker, Makerbot, UP Mini, UP Plus
  • Filament comes in a light spool, in a sealed package with a bag of desiccant.

Detailed Information available on our Homepage…

SainSmart Ramps 1.4 + A4988 + MK2B + Mega2560 R3 + LCD 12864 3D Printer Controller Kit for 3D Printers RepRap

This is the new SainSmart 3D Printer Starter Kit, developed specially for those
beginners who are interested in 3D printer. You will have a complete set of
Sainsmart’s most common and useful electronic components. You may learn about
Sainsmart through using these basic projects.

Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit
the entire electronics needed for a RepRap in one small package for low cost.
RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has
plenty room for expansion. The modular design includes plug in stepper drivers
and extruder control electronics on an Arduino MEGA shield for easy service,
part replacement, upgrade-ability and expansion. Additionally, a number of
Arduino expansion boards can be added to the system as long as the main RAMPS
board is kept to the top of the stack. This board is mostly based on Adrian’s
Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by
Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly
on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin
definitions and many design improvements. Much inspiration, suggestions, and
ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap
community.

Package List:

1 x RAMPS 1.4

1 x Mega 2560 R3

5 x A4988 driver

1 x LCD 12864 With Controller

1 x SD card breakout For ramps

1 x Cooler Fan for 3D ramps

6 x Mechanical Endstop with cable

1 x RAMPS 1.4 wiring cable

1 x Heatbed MK2B

5 x NEMA 17 Stepper Motors

1 x USB Cable

Note: Download the doumentation & codes here:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+12864/arduino-0023.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart LCD 12864 contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display. You can easy connect it to your Ramps board using the “smart adapter” included. After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
  • SainSmart Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications. Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next 3D printer project! Board comes fully assembled and tested.The bare socket is available. MK2a is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants.

Visit The Website For More Information…

Printrbot Assembled Simple 2014 3D Printer, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume

The Printrbot Simple 2014 fully assembled 3D printer has an open platform with an aluminum print bed and a frame constructed of machined aluminum and laser-cut birch wood for fabricating objects to maximum dimensions of 4 x 4 x 4 inches/100 x 100 x 100 mm (H x W x D) using PLA (polylactic acid) thermoplastic filament. The printer has a vertical resolution of 100 microns (0.10 mm) and comes with a direct drive 6061 aluminum extruder with a shrouded cooling fan, and an Ubis hot end that accepts 1.75 mm PLA filament. The unheated 6061 aluminum print bed has a matte finish and provides a level build surface that will not warp. The printer is commanded through the provided micro USB cable using G-code numerical control instructions. An SD memory card slot can store G-code instructions on a memory card (sold separately) for operation without a connection to a computer. It can be used with 3D printer management software packages (sold separately). The frame is made of laser-cut birch wood. Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement. The size 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. The printer comes with a sample spool of PLA filament.

Specifications
Printing material PLA
Vertical (Z-axis) resolution 100 microns (0.10 mm)
Hot end Ubis 1.75 mm
Nozzle diameter 0.4 mm
Build speed 60-65 mm/min
Build volume 4 x 4 x 4 inches/100 x 100 x 100 mm (H x W x D)
Overall dimensions 8 x 14 x 11 inches (H x W x D)
Weight 5.25 lb (2.38 kg)
Input format G-code
Input method Micro USB cable (included) or SD memory card (sold separately)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

3D printers fabricate physical objects directly from computer-aided-design (CAD) data sources. Objects created by additive manufacturing are built by dispensing successive thin layers of molten material onto a moving platform base from a robotic extruder nozzle. The material is most commonly a thermoplastic or HDPE (high-density polyethylene) filament.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?

  • Printrbot Simple 2014 3D Printer
  • 12v 6A laptop style power supply
  • Power cord
  • USB cable
  • Sample spool of 1.75 mm PLA plastic filament

Product Features

  • Fabricates objects from G-code instructions using PLA thermoplastic filament
  • Open platform for ease of access with machined aluminum and laser-cut birch wood frame construction
  • Builds objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
  • Vertical (Z-axis) resolution of 100 microns (0.10 mm)
  • 6061 aluminum print bed provides a level build surface that will not warp

Click Here For More Information