Kee Pang 10Pcs M6 3D Printer Nozzle Brass Extruder Nozzle Print Head( 0.2mm 0.3mm 0.4mm x 4 0.5mm 0.6mm 0.8mm 1.0mm ) and 10pcs Drill Bits Extruder Nozzle Cleaner for E3D Makerbot

Package include

1x 0.2mm Nozzle Print Head +1x 0.2mm Nozzle Cleaning Kit
1x 0.3mm Nozzle Print Head +1x 0.3mm Nozzle Cleaning Kit
4x 0.4mm Nozzle Print Head +4x 0.4mm Nozzle Cleaning Kit
1x 0.5mm Nozzle Print Head +1x 0.5mm Nozzle Cleaning Kit
1x 0.6mm Nozzle Print Head +1x 0.6mm Nozzle Cleaning Kit
1x 0.8mm Nozzle Print Head +1x 0.8mm Nozzle Cleaning Kit
1x 1.0mm Nozzle Print Head+1x 1.0mm Nozzle Cleaning Kit

Product Features

  • 0.2mm 0.3mm 4×0.4mm 0.5 mm 0.6mm 0.8mm 1.0mm Extruder Brass Nozzle Print Head for V5 V6 3D Printer
  • Extruder Brass Nozzle Print Head:Material – copper (brass);Color – Golden
  • Input Diameter: 1.75mm Output Diameter: Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm
  • The drill bits will clear your printer nozzles very well and print better
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here For More Information

CCTREE 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10pcs)

Product description:

Cartridge Heater Description

Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention

The heating wire inside which is wound onto a ceramic core

The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures

The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Package Included :
5*12V Cartridge Heater with 1m wiring
5* NTC 3950 100k thermistor

Product Features

  • Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
  • Voltage: 12V. Power: 40W
  • Diameter: 6mm ; Length: 20mm
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration

Visit The Website For More Information…

Kweiny Drill Bit (Needle) for 3D Printer Makerbot | Extruder Nozzle Cleaning Tool Kit | Flexible Stainless Steel Material 10PCS Diameter 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.45mm 0.5mm 0.6mm 0.7mm 0.8mm

1. Each needle has a label that marks the diameter of it. To make it easier to clean up, you can use a small diameter needle first and then use a needle with the right diameter;
2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉). You can twist the needle to make it easier to clean up;
3. After replace the nozzle, you’d better recalibrate the distance between nozzle and plate to ensure the quality of print parts;
4. Size:
total length: 70mm/2.76in;
Needle length: 40mm/1.57in;
Handle length: 30mm/1.19in
5. Sharp parts, please keep away from children.

Product Features

  • Compatibility: Matches all 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
  • Quantity and size: 10PCS in total, 1 pieces per specification, diameter specifications 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.45mm 0.5mm 0.6mm 0.7mm 0.8mm
  • Widely used: It can be used to accurately measure the diameter of nozzle holes. You can precision clean all of your 3d printer extruder nozzles and other small parts by the tool kit, such as the feed gear. You can also use 0.8mm needle to clean holes in larger diameter
  • Material: SUS304 stainless steel, it’s flexible and doesn’t break easily. It comes with a handle, so you can easily twist it in during use
  • Durability: It can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used

Click Here If You Need More Detailed Info…

Jili Online 10Pcs MK8 3D Printer 0.5mm Extruder Brass Nozzle Print Head for 1.75MM ABS and PLA Materials


– Precision Machined and Durable, High Quality Nozzle head

– Suitable for 3D printer Parts

– Material: copper (brass)

– Input Diameter: 1.75mm

– Quantity:Pack of 10


– Nozzle: 0.5mm

Package Includes:

10Piecex3D Printer Extruder Nozzle

Product Features

  • Precision Machined and Durable, High Quality Nozzle head
  • Suitable for 3D printer Parts
  • Material: copper (brass)
  • Input Diameter: 1.75mm
  • Quantity:Pack of 10

Click Here For More Information

Happisland GT2 Timing pulley,Aluminum GT2 Timing Belt Pulley 20Teeth bore 8mm for RepRap 3D Printer(Pack of 10pcs)

Pulley Specifications:
Tooth: 20T
Bore: 8mm
Belt Width: 6mm
Material: aluminum
Package Including:
10 x GT2 Timing Belt Pulley

Product Features

  • Pack of 10 pcs,Teeth Number: 20 Teeth; Bore of Pulley: 8mm.
  • Material:aluminum
  • high quality aluminum, excellently machined, finished smoothly.
  • Perfect choice for CNC engine machine, gear shaper, drilling machine, milling machine, hobbing machine or similar projects
  • Any question,pls feel free to contact us.

Click Here For More Information