MYSWEETY 3D Printer Accessories Kit, 500mm Stainless Steel T8 Trapezoidal Lead Screw KFL08 bearing Stepper Motor Nema 17 For 3D Printer Hobby CNC Router XYZ

Specifications:
Lead screw:
Material: stainless steel
Diameter: 8mm
Pitch: 2mm
Lead: 4
Total Length: 500MM

Shaft coupling:
Material: aluminium
Shaft: 6.35 x 8mm
Length: 25mm
Diameter: 18mm

Nema 17 Stepper motor:
Color:silver+black
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%

How to install:
1. Pls put screw nut into the Lead screw.
2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.

Package Included:
1x Lead screw
2x Mounted ball bearing
1x Shaft coupling
1x Stepper motor

Product Features

  • Package include: 3D printer accessories kit(1xscrew + 1xstepper motor + 2xball supports + 1xshaft coupling).
  • Lead Screw: Material: Stainless stell; Diameter: 8mm; Pitch: 2mm; Length: 500mm. Mounted Ball Bearing: Material: Zinc alloy; Bore diameter: 8mm.
  • Lead screw mainly used in stepper motor, machine tool, and other equipment. Lead screw without processing, direct connected to bearing.
  • Suitable for industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ module; slider; lifts etc.
  • Large torque, small vibration, high-quality, low noise!

Detailed Information available on our Homepage…

Hot Bed MOS Tube,Hot Bed Power Expansion Board / MOS Tube High Current Load Module / Heatbed Power Module for 3D Printer Heating Bed Accessories by Drillpro

▶Specification◀:
▶Condition: 100%Brand new and high quality

▶ Dimensions: 50*60mm

▶Weight: about 40g

▶ HIGH current load module hot bed Power expansion board / Heatbed power module / mos tube for 3D Printer.

▶ HIGH-POWER module thermal bed, completely solve the thermal power is too large bed, load current issue.

▶This module under the premise of normal cooling, found at I (Max) -25A situation stable work. During use, do not exceed current 25A.

▶Type: hot bed Power expansion board

▶ Package Contents:◀

▶ 1 X Hot bed Power Module

Product Features

  • ▲ Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
  • ▲ Completely solve the hot bed power is too large and the load current issue.
  • ▲ General Add-on Heated Bed Power Expansion Module.
  • ▲ With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.
  • ▲ Please choose the appropriate power according to the power of the hot bed, leaving enough margin. High-power hot bed is recommended to use 24V power supply, so that the same power requirements, the current is 12V smaller.

Detailed Information available on our Homepage…

Creozone 3D Printer Tool 3D Print Removal Tool Steel Spatula, Professional 3D Printer Accessories

This is Creozone special design removal tool for 3D printing.

Product Features

  • Professional 3D print removal tool
  • Wood grain handle and stainless steel knife
  • This 3D print removal tool can help you easy get the prints off from the build surface
  • Will not scratch build surface
  • Net Weight: 2.4 ounce

Detailed Information available on our Homepage…

“TWP 3D Printer accessories Motor Parallel Module for Double Z Axis Dual Z Motors for 3D Printers

This module is only used for motor-side parallel, a driver drives two motors. And only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly). Shipping list(Per unit): Motor parallel module * 1pc 10cm motor cable * 1pc

Product Features

  • Suitable for motor-side parallel, a driver drives two motors
  • Only for mini printers or small current motors in parallel
  • Easy to connect

Detailed Information available on our Homepage…

Pink Lizard MK8 All Metal Long Distance Remote Bowden Extruder Parts 1.75MM Supplies Extruder Accessories For 3D Printer Accessories

MK8 All Metal Long Distance Remote Bowden Extruder Parts 1.75MM Supplies Extruder Accessories For 3D Printer Accessories Description Use 1.75 mm Supplies 7075 aerospace quality aluminum alloy surface sandblasting oxidation. Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies) Package Included: 1 x Stepper motor holder 1 x MK8 extrusion gear 1 x 624 ZZ pillow 2 x Delivery head 1 x Hexagon wrench 1 x Adjusting springs set 1 x Assembly srews set. If there is a size or colour choice please email me with your choice or it will be sent at random.

Product Features

  • MK8 All Metal Long Distance
  • Remote Bowden Extruder Parts 1.75MM
  • Electronics
  • Please Allow 7-23 Business Days For Delivery
  • Package Contains One Item

Detailed Information available on our Homepage…