Zomiee 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Heads + 5pcs Aluminum Heater Block Extruder Kit for MK8 M6 Makerbot Reprap 3D Printers

Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer, works with Anet A8.

Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Aluminum Heater Block:
Material: Aluminum
Dimensions: 20*20*10mm(L*W*H)
Net Weight: 6g/pcs
Inner hole for install screw: M6 and M3 (heat pipe and thermocouple)

Package:
5 x MK8-0.4mm Brass Nozzle
5 x M6*30MM Extruder 1.75mm Tube
5 x MK8 Aluminum Heater Block

Product Features

  • [Throat Tube] – Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • [Nozzle] – 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • [MK8 Aluminum Heater Block] – Dimensions: 20*20*10mm(L*W*H); Material: Aluminum.
  • [Compatibility] – Suitable for Makerbot printer
  • [Combine Pack] – 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Head + 5pcs Aluminum Heater Block

Click Here If You Need More Detailed Info…

PChero 5 Meter 6mm Width 2GT Timing Belt w/ 2Pcs 2GT Timing Belt Aluminum Gear Clamp Mount Block – for 3D Printer CNC

Specification:

Compatibility: Works with most 3D Printers.

2GT Timing Belt:
Pitch :2mm
GT2 Belt Width: 6mm
Belt Length: 5 Meters/ 16.4 ft
Material: Rubber

Timing Belt Mount Block
Material: Aluminum
Quantity: 2 pcs
Size: 9 x 40mm, the middle hole M4 is fixing hole.
Pitch: 2mm
Tooth width: 0.85 mm
Depth of the Tooth: 0.9 mm.

Package Included:

1 x 5 Meters GT2 timing belt
2 x timing belt Aluminum Mount Block

Note:

PLEASE Make sure that the Gear is tight and no loose connection with the timing belt.

Product Features

  • PACKAGE Includes: 1pcs 6M GT2 timing belt and 2pcs Timing Belt Aluminum Mount Block.
  • GT2 Timing Belt system is designed for linear movement and positioning applications, such as 3D printer, CNC and other robotics.
  • 6mm Wide, Open Ended, Stretch Resistant Fiberglass Reinforced Neoprene Rubber GT2 Timing Belt.
  • Comes with 2pcs high quality mount blocks that used in open belt closures for 2GT(and some other models)belt.
  • Accurate and durable locating parts holding features to attain maximum repeatability and positioning accuracy.

Visit The Website For More Information…

Wangdd22 10PCS 3mm Thick Thickness 3d Printer Heating Block Cotton Hotend Nozzle Heat Insulation Cotton For Ultimaker/Makerbot

Description:
This heat insulation cotton is used for 3D printer nozzle keeping warm.
Made from heat-resistant ceramic fiber.
3mm thickness, if not needing such thickness that you can tear off the next layer.
The advantage is for keeping the key parts of the 3D printer – heating aluminum block warm, making the internal temperature flat, saving power, and energy.
This high temperature resistant cotton can work for a long time in high temperature of 900 degree.

Specifications:
Item Type: Heat Insulation Cotton
Material: Ceramic Fiber
Color: Yellow+White
Size: 75mm*21*3mm +/-0.2mm
Thickness: 3mm

Note:
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3mm thickness,customers does not need that can tear off the next layer

Packing Included:
10x heating block cotton

Product Features

  • 100%brand and new
  • Thermal shock resistance
  • Low thermal conductivity and low heat capacity
  • Fiber has good elasticity,high temperature and small shrinkage
  • High temperature resistance over 900 DEG

Visit The Website For More Information…

BIQU 330mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

Specifications:
Lead Screw Length: 330mm
Lead Screw Diameter: 8mm
Coupler Shaft Usage:5mm to 8mm
Coupler Dimension:25*19mm
Pillow Bearing Block Bore:8mm
Net Weight: 191g

Package Included:
1* T8-330mm Lead Screw
1* Copper Nut
1*Coupler
2*Pillow Bearing Block

Note: If there have any missing part pls contact us before leaving negative review and we will resend to you, thanks!

Product Features

  • Lead Screw Length: 330mm
  • Lead Screw Diameter: 8mm
  • Coupler Shaft Usage:5mm to 8mm
  • Coupler Dimension:25*19mm/Pillow Bearing Block Bore:8mm
  • Note: If there have any missing part please contact us before leaving the negative review and feedback, thanks!

Visit The Website For More Information…

Aunifun 5Pcs 30MM Length Extruder 1.75mm Tube and 5Pcs 0.4mm Brass Extruder Nozzle Print Heads And 5Pcs Aluminum Heater Block Specialized for MK8 Makerbot Reprap 3D Printers

✿Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

✿Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer.

✿Specification of Heater Block:
Dimensions: 20*20*10mm(LxWxH)
Net Weight: 7g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Makerbot printer

Package Including:
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head
5 x Aluminum Heater Block

Attention: Small parts, keep away from children!!!

Product Features

  • ✿✿✿ Made of solid aluminum material, durable in use.
  • ✿✿✿ Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • ✿✿✿ 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • ✿✿✿ Nozzle Throat and Nozzle Print Head compatible with all 1.75mm PLA ABS 3D printer.
  • ✿✿✿ Heater Block Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)

Detailed Information available on our Homepage…