Best 3D Printing Build Surface – 8×8 Square Bases – Bin the Blue Tape, Kapton Tape and Hairspray, No Prep 3D Printer Base

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Compatible with: E3D V6, makerbot mk8, Anet A8/A6, RepRap, mendel, Prusa i3, P3Steel 3D Drucker printer and many more 3D printers!
Extreme Hold for: ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE)

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Check Out Our Website For Details…

2017 Newest High Performance Shining 3D Einstart-S Desktop 3D Printer (Alloy Framework, High Accuracy, Stability and Speed, Large Build Size) – Blue

Shining 3D was founded in 2004 and successfully got listed in OTC stock market on August 8, 2014, becoming China’s first OTC stock in 3D digitizing and 3D printing industry.Einstart-S desktop 3D printer, developed by Shining3D. It is the second generation desktop 3D printer of Shining3D.

Einstart-S is designed for home or research institute use, features in easy operation, unique one-press printing design, meets all the needs of 3D printing. Any user can operate the printer within 10 minutes and print the first 3D model to have fun.

Equipment Dimension(mm) 300*320*390

Build Size(mm) 160*160*160

Printing Accuracy(mm) 0.15-0.35

Print Head Single

Nozzle Diameter(mm) 0.4

Material PLA

inside Breathing Light Yes

Control Software 3D START 1.3(Graphic interface)

Filament Pause-and-chage Yes

Display Screen OLED LCD

Filament Tray Built-in

Printing Speed(cm?/h) 24

Axis Runn

Product Features

  • Easy to use no PC connection needed. Full metal framework ensures high print quality. Pre-assembled.
  • Support .stl file from all design software. Support all 3rd party 1.75mm PLA filament.
  • Non toxic filament, protected print head, safe for open environment usage. No calibration needed.
  • Smart Control Software offers print pause, filament change, temperature/ sprint speed adjust.
  • Comprehensive customer support, Regular Firmware/ control software Upgrade. Mature user community.

Click Here For More Information

Zonyee 3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker 8.42″ x 8.42″ Square,Black(Pack of 5pcs)

Compatible with ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments (sold separately). Background is made of 3M adhesive , easily stick on the heat bed platform

Product Features

  • Size: 214 x 214 mm (8.42″ x 8.42″)
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.
  • Compatible with ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments (sold separately)
  • Instant bonding with convenient use. Background is made of 3M adhesive , easily stick on the heat bed platform

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printer Build Surface Polyetherimide Ultem

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Easily cut down to size by scoring with a utility knife

Click Here For More Information

Pxmalion Mini 3D Printer, Single Extruder, Build Size 4”x5.3”x4.7, High Accuracy, Metal Frame Structure with Monitor, Works with PLA Filament (Black)

The design of Pxmalion Ant Mini is compact and simple. Those ball linear motion guides ensure the positioning accuracy. The stout sheet steel case enables the stability. Featured with small size, ease of use, good print precision, this 3D printer is proper to be used in a wide range of industries.

Features:
● High precision screws for Z motion
● Pxmalion MKS-Mini-II mother board
● Nozzle assembly with efficient cooling
a. 0.4 mm brass nozzle, aperture reamed to no more than ±0.01mm tolerance, smooth extrusion is guaranteed.
b. Ball bearing cooling fan, much better than the ones with slide bearing in terms of performance and service life, enables stable nozzle temperature (max.245°C), evenness of plastic.
c. The nozzle is design with channels to guide the wind to achieve quick cooling result to ensure a favorable printing environmen.
● 3:1 ratio CNC cut gears to drive the extruder
a. Less torque required to push the filament than other designs
b. Tough, light components of engineering plastic
● Stepper motors customized for Pxmalion
● 5052 aluminum-magnesium alloy high efficiency heating print bed
● Elaborately designed mechanical components
a. The structural components are all machined metal
b. Brass nut for the driving screw, low friction, high wear-resistance and long service life

Specifications:
– Machine Dimension: 8″DIAx13″H
– Build Volume: 4″x5.3″x4.7″
– Build Accuracy: 0.1mm
– Positioning Accuracy: 0.01mm
– Printing Speed: 0-120mm/s
– Layer Thickness: 0.05-0.2mm
– Printing Material: 1.75mm PLA
– AC Input: 7A, 50Hz- 60Hz, 120W
– Net Weight: 15.4lbs

Accessories Include:
1 x Pxmalion Ant Mini 3D Printer
1 x Epoxy platform top
1 x Power cable
1 x Glue
1 x SD card
1 x SD card reader
1 x Tool Kits

Product Features

  • Compact Design
    The Ant Mini has an open frame, with no window or door in front; the build area is 4 by 5.3 by 4.7 inches with smooth print quality.

  • Hi-Effecient Cooling Nozzle
    0.4mm brass nozzle with aperture reamed to no more than ±0.01mm tolerance for smooth extrusion guarantee.

  • Misprint-Free Consistency
    The 2 ball screws for Z motion are driven by 1 motor, the uninterrupted synchronization of them is promised.

  • Sophisticatedly Constructed Coupler
    Made with 4A01 silicon aluminum alloy, the coupler to connect the motor and screw can be resistant to operating environment in high temperature. Every flexible component is proven to be used with ease in forceful vibration condition to against unexpected load or impact.

  • Easy to Use
    PxmalionPrint is compatible with many mainstream systems in the market. You can use various colored PLA filaments to print your design.

Click Here For More Information