WAHHING 3D Printer Precision Drilling and Nozzle Cleaning Kit 10PCS total E3D v6 and Volcano compatible

Safety Guide
Keep away from small children.
This products are only suitable for 3D printer use indoors.
Please read your use guideline of the 3D printer manual carefully before installing and using it. 

Package:

0.2mm, 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm (10 Piece Toolkit)

WARNING!!
►DO NOT ATTEMPT TO CLEAN YOUR HOTEND WHILE IT IS COOL! For best results set your hotend to at least 220°C (428°F) and let temperature stabilize before cleaningWARNING!!
►Tungsten carbide is very strong but can also be brittle at this size. Take care not to force the bits to avoid breaking. 
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►Remove carefully cutting tools from pack.
►Wear eye piotection & use machine guard when utilizing tools.
►Avoid contact with bare hands for preventing injury/
►To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm and 1.2mm
  • Unlike other cleaning kits out there our kit has all common bit sizes to clean nozzles of all sizes.
  • 10 precision tungsten carbide drills with colored silicone grips for precision motion and easy identification of bits.
  • Bit holder may be removed from the case for easier loading and unloading of bits.
  • Matches all current nozzle size offerings from E3D v6 and Volcano hotends! (Not Included)

Click Here If You Need More Detailed Info…

TIANSE 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit, 5PCS

★Don’t use the drill to clean until the nozzle is heated to above 200 degrees.

Product Features

  • Bit Diameter: 0.4 mm – Bit length: 16 mm
  • Length of Shank: 20 mm
  • Package Included: 5 x 0.4 mm Drill Bits
  • 12-month warranty and 24*7 customer support with technical advice
  • ★Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here If You Need More Detailed Info…

3d Printer Nozzle Cleaning, 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit by EAONE


EAONE 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

Specification
Type:drill bit
Material: silicone
Bit diameter: 0.4mm
The length of drill: 8mm
The length of shank: 20mm
Color: Random

Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Package include
10 x Drill bits

Product Features

  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Diameter: 0.4mm; The length of drill:8mm; The length of shank: 20mm
  • Color: Random
  • Package includes 10 pack of 0.4mm drill bits
  • Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Detailed Information available on our Homepage…

0.4mm Drill Bits – 3D Printer Nozzle Cleaning Kit – Stainless Steel, 4.1″ Length (5-Pack)

Package Included: 5 x 0.4mm Needle Drill Bits.

Product Features

  • Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.)
  • Bit diameter: 0.4mm; The bit length:7.5cm; The length of shank: 3cm; Total length: 10.5cm. Material: Stainless Steel.
  • Good toughness and not easy to break off.
  • Package Included: 5 x 0.4mm Needle Drill Bits.
  • 30 DAY MONEY BACK GUARANTEE – All PAGOW customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfied for any reason.

Click Here If You Need More Detailed Info…

Kangnice Stainless Steel Nozzle Cleaning Needle 0.2/0.25/0.3/ 0.35mm for 3D Printer


Description:

Features:
100% brand new and high quality.
3D Printer nozzle cleaning needle with diameter of 0.2mm/0.25mm/0.3mm/ 0.35mm.
1 set includes 8 pieces (4 sizes) of needle, each size has 2 needles of the same specification.
For all 0.4mm nozzle (Reprap, Ultimaker, Makerbot, Flashforge and more).
The tip of the needle is smooth and sharp.
The needle body has the advantages of high strength and good toughness.
Unique needle handle and needle body construction.
Can effectively clean the nozzle of 3D printer, nozzle will not easily be damaged.

Specifications:
Item Type: Nozzle Cleaning Needle For 3D Printer
Material: Stainless Steel
Color: Silver
Size: (Approx.)
Diameter: 0.2mm; Length: 5cm/1.97″
Diameter: 0.25mm/0.3mm/0.35mm; Length: 7cm/2.76″
1 Set=8Pcs: 2Pcs*0.2mm needles + 2Pcs*0.25mm needles +2Pcs*0.3mm needles + 2Pcs*0.35mm needles
Quantity: 1 Set (other accessories demo in the picture is not included)

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4.No retail package

Package includes:
1 Set(8Pcs) X Nozzle Cleaning Needle

Product Features

  • Material: Stainless Steel.
  • 3D Printer nozzle cleaning needle with diameter of 0.2mm/0.25mm/0.3mm/ 0.35mm.
  • For all 0.4mm nozzle (Reprap, Ultimaker, Makerbot, Flashforge and more).
  • 1 Set=8Pcs: 2Pcs*0.2mm needles + 2Pcs*0.25mm needles +2Pcs*0.3mm needles + 2Pcs*0.35mm needles
  • Unique needle handle and needle body construction.

Click Here For More Information