- Color Chang Filament
- From Green to Yellow
- Colour Chang Temperature: about 31°C
Brand Name: SHONCO
The 3D printing pen is designed for painting lovers, designers, amateurs, students, kids, etc.
The newest 2nd generation 3D printing pen, it is a magic pen that bring fantastic thoughts(imagination) into vivid objects (reality).
So never miss the chance to live your dream! Make your drawing(dream) on paper get wings and fly in the air.
Children less than 8 years, please use it under the guardian of adult.
The nozzle and surrounding area can reach to Fahrenheit, 132 degrees Celsius, keep your bare hands away from the nozzle.
-Material Printed way: Heat Melt Extrusion Molding
-Printer Material : ABS/PLA 1.75mm
-Forming: Three-Dimensional Shape
-Spinning Speed: Adjustable
-ABS Heating Temperature: 210 – 235 degree; PLA Heating Temperature: 160 – 250 degree; -Device Operating Voltage: 12V 3A
1.When change the material from PLA to ABS , unload the ABS filament, restart your equipment (unplugged), Then switch to ABS by press the “material selection / tempering” button , and then load the ABS filament.
2.When change the filament from ABS into PLA , the correct way is: in the ABS mode, unload the filament, restart the pen,, switch to PLA mode by the selection of materials / tempering “button . Then load the PLA filament after heating finished quickly. (This step is very important!)
The product packing list:
1 * A 3D stereoscopic printing pen
3 * Free filaments (ABS) 10g for each color
1 * Manual(in English )
Note: 1. This listing is 0.4mm/1.75mm, and with PTFE tube inside. Please let us know if you need other sizes, or the one without PTFE tube. 2. The default shipping of the heater is 12V 40W. Please leave us message if you need the one of 24V 40W. The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product. To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement. Tips for radiating of the 2 in 1 out and 2 in 2 out hotend kits: Due to double pipes, the measured temperature is two times than that of single head. Therefore, customer need to take ancillary action for radiating of the heat sink block, or it will probably cause blocking, especially in summer when the temperature is high. 1. Please keep the room temperature be not too high, 2. The recommended temperature of PLA: 185-200 degrees in summer, and 195-215 degrees in winter. 3. We recommend to add the high-quality dual ball bearing 11000 rbm fan for assisted cooling (the speed is three times higher than that of similar products in the market.)