8pcs M6 Thread 3D Printer Brass Nozzle Copper Extruder Head for 1.75mm Filament (Four Sizes 0.2mm 0.3mm 0.4mm 0.5mm)

Package includes:

2 x 0.2mm Nozzle
2 x 0.3mm Nozzle
2 x 0.4mm Nozzle
2 x 0.5mm Nozzle

Product Features

  • Material: Brass
  • Nozzle Holes: 0.2mm, 0.3mm, 0.4mm, 0.5mm
  • Size (Diameter x Height): about 0.7 x 1.7cm (0.28 x 0.68″ )
  • Package included: 8 x Printer Nozzles (2pcs for Each Nozzle Hole)

Visit The Website For More Information…

BIQU 330mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

Specifications:
Lead Screw Length: 330mm
Lead Screw Diameter: 8mm
Coupler Shaft Usage:5mm to 8mm
Coupler Dimension:25*19mm
Pillow Bearing Block Bore:8mm
Net Weight: 191g

Package Included:
1* T8-330mm Lead Screw
1* Copper Nut
1*Coupler
2*Pillow Bearing Block

Note: If there have any missing part pls contact us before leaving negative review and we will resend to you, thanks!

Product Features

  • Lead Screw Length: 330mm
  • Lead Screw Diameter: 8mm
  • Coupler Shaft Usage:5mm to 8mm
  • Coupler Dimension:25*19mm/Pillow Bearing Block Bore:8mm
  • Note: If there have any missing part please contact us before leaving the negative review and feedback, thanks!

Visit The Website For More Information…

BIQU 330mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

Specifications:
Lead Screw Length: 330mm
Lead Screw Diameter: 8mm
Coupler Shaft Usage:5mm to 8mm
Coupler Dimension:25*19mm
Pillow Bearing Block Bore:8mm
Net Weight: 181g

Package Included:
1* T8-330mm Lead Screw
1* Copper Nut
1*Coupler
2*Pillow Bearing Block

Note: If there have any missing part pls contact us before leaving negative review and we will resend to you, thanks!

Product Features

  • Lead screw length: 330mm
  • Lead screw diameter: 8mm
  • Coupler shaft usage:5mm to 8mm
  • Coupler dimension:25*19mm/Pillow bearing block bore:8mm
  • Note: If there have any missing part please contact us before leaving the negative review and feedback, thanks!

Visit The Website For More Information…

3D Printer PLA Filament Copper color 1.75 mm 0.5 kg ( 1.1lbs ) Spool 500g Printing Materials

“Diameter (Tolerance): 1.75 mm ±0.05 mm Net Weight: 500g Recommended Printing Temp: 195 – 230 °C Recommended Printing Speed: 30 – 90 mm/s Heated Bed: ~ 80 °C “

Product Features

  • highlight filament

Check Out Our Website For Details…

SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Red Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…