3D Pen Nozzle/Printer Head Part Replacement /Nib Replacement, Works for 1.75MM PLA& ABS Filament

Used for 1.75mm ABS & PLA filament
Compatibility asin: B01N7RZFTY/B01MY82BSE
Material :non-metal aerial material
Package Includes :
1 x Nozzle for 3D Printing Pen

Product Features

  • Nib replacement(heater and nozzle )works for 1.75mm ABS & PLA Filament with Tipeye normal temperature 3d printing pen asin: B01N7RZFTY/B01MY82BSE
  • Enhanced ceramic material for greater reliability and longer service life
  • Safety design so it is asy to remove and replace
  • Pay attention to the temperature of the nozzle when using.Please do not touch it.

Visit The Website For More Information…

Anycubic NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End Pack of 5PCS

Specification:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware

– Small Size: 1.25mmx2.0mm glass bead

– High accuracy: 1%

– Resistance value at 25°C=100K

– Wiring insulation: high temperature teflon/PTFE

– Wiring length: 1 meter

Package List:

5* NTC 3950 100k thermistor with female head

Product Features

  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
  • Use it with heated bed or extruder
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Pack of 5PCS

Click Here For More Information

T&B 3D Printer 0.4mm Extruder Nozzle Cleaner Micro Drill Bit Extruder Head Cleaner for MK7 MK8 Makerbot RepRap Felix more 1.75mm filament ABS PLA 5PCS

Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These micro dtill bits are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints.
Specifications:
Bit diameter: 0.4mm
The bit length: 16mm
The length of shank: 20mm
Please kindly note:
Don’t use the drill to clean until the nozzle is heated to above 200 degrees!
Package Included:
5 x 0.4mm Drill Bits

Product Features

  • ✔Bit diameter: 0.4mm
  • ✔The bit length: 16mm
  • ✔The length of shank: 20mm
  • ✔Will clear nozzles and produce finer prints
  • ✔Extends nozzle life

Click Here For More Information

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

Product Features

  • Material: brass
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm
  • Installation: external M6 thread connection
  • Compatible: Compatible with all 1.75mm pla abs printer

Detailed Information available on our Homepage…

Witbot integrated heat bed V6 extruder head kit+remote feed nozzle + 12V fan+12V40W heater remote extrusion kit for 3d printer

 Integrated venturi nozzle Product description:
Feeding mode: Remote feed
Nozzle diameter: 0.4
Material: Stainless steel
Dimensions: M7– 41.4mm
Weight: M7 threaded pipes 4.4g
Consumables: 1.75mm PLA, ABS

Pacage Content:  
1*one-piece supporting fast heating
1*supporting straight quick plug
1*V6 remote heat pipe
1* integrated hose – nozzle * 1; (0.4 nozzle size)
1*100K NTC 3950 thermistor temperature measurement
1*heating tube 12V40W (default 12V, 24V 40W For distribution, please note)
1*Fan Kit(default 12V fan, for the fan with 24V, please note)

Product Features

  • 100% tested, quality is assurance
  • Support professional users changing printing needs, while beginners easily experience the fun of 3D printing
  • Hose, nozzle integrated design, integration of different hot end advantages, can meet the high-quality, high-precision, high-volume 3D printing technology requirements
  • Stable and reliable performance
  • It has been installed well

Click Here If You Need More Detailed Info…