Tag Archives: Hotend

Anet A2 / A8 3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for MK8 Makerbot Reprap i3

Specification of Extruder Tube: Type: Nozzle Throat Material: Stainless Steel & Teflon Length : 30mm (Suitable for Anet A8/A2 3D Printer) External Thread Diameter: 6mm Input Diameter: 1.75mm Compatibility : 3D Printer Filament Diameter : 1.75mm Note:Anet A8/A2 For 30mm tube. Specification of Brass Nozzle: Type: 0.4mm Extruder Brass Nozzle Print Head Suitable for the PLA/ABS/TPU filament with diameter 1.75mm Color: Golden. Material: brass Input Diameter: 1.75mm Output Diameter: 0.4mm External Thread Diameter: 6mm Specifications of Heater Block: Type: Heater Block Material: Aluminum Suitable for: 3D Printer […]

Read more

1.75mm MK8 0.4mm Nozzle Thermocouple Extruder Hotend for Prusa i3 3D Printer 12V

Material: Aluminum & Stainless Steel & Brass Installation type: external thread connection Scope of application: 3D printer Nozzle size: 0.4mm Throat pipe length: 30mm Aluminum block size: 20 mm x 20 mm x 10 mm Operating temperature range? -40 ~ +260°C (-40 ~ +500 °F) Thermistor and heater cable length: 1M Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon). MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W. Compatible with: Canon IP4500/5300, MP610/810, MX850 Product Features High […]

Read more

WINSINN 3D Printer Upgrade Bowden MK8 Extruder Hotend Kit Driver Feeder – For 1.75mm Nozzle Filament – TEVO Anet A8 RepRap Prusa i3 Makerbot Accessories Parts

►This Kit NOT Include Motor. ►Suitable For Remote and Short distance ►Extruder Compatible with TEVO, Anet A8, Prusa i3, And any FDM 3D Printer conversion to bowden ►Support: 1.75mm Filament ————————————————————————————————————— Package include: ►1 x WINSINN Bowden MK8 Upgrade Kit (All Accessories show as Picture 2) ►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:)) Product Features This Kit NOT Include Motor. This Bowden Extruder can replace MK8 Extruder Suitable For Remote and Short distance For 1.75mm […]

Read more

[Gulfcoast Robotics] HEX Screw-In M3 EPCOS Thermistor for 3D Printer Extruder Hotend. Working Temperature up to 300C. 2017 Version.

New 2107 Version with working temperature up to 300C. Leads insulated with fiberglass, thermistor glued with 600C rated ceramic compound. Our Screw In Thermistor uses most popular in reprap community EPCOS B57560G104F.Hex brass body with M3x0.5 threaded stud allows you to easily screw the thermistor into a M3 hole with zero chance of it falling out halfway through a print.Simply tap the existing hole on your hot end with a M3 tap and screw in the thermistor. The thermistor leads are insulated in fiberglass Tubing, 2 Pole […]

Read more

Homyl Extruder Kit 1.75/0.4mm Hotend J-single Head 3D Printer Parts for Anet A8

Description: – Material: Aluminum alloy – Size: 200X150X50mm – Nozzle diameter: 0.4mm – Movement axis speed: 40m – Nozzle flow rate: about 24cc/ h – Print Material: ABS, PLA 1.75/3.0mm – Fan Cable:1m – Heating Head Cable:0.5m – Stepping motor Cable:1m – Cooling fan operating voltage :12V – Extrusion head heating voltage 12V – Extrusion head: voltage 12V, power 40W – Heat sink :40x40x10mm – 42 Step motor:42x42x40mm Package Includes: 1 PiecexExtruder Kit Product Features Material: Aluminum alloy Size: 200X150X50mm Nozzle diameter: 0.4mm Movement axis speed: 40m […]

Read more
1 2 3 26