Cable Track – SMALL (Drag Chain), 0.5″x0.5″ Inner, 12″ Length – Made in the USA

The new Cable Monkey Cable Track! Cable Monkey started producing their very first cable track using a high quality, military grade, recycled glass filled nylon material. This made for a strong, long lasting cable carrier that will keep your cables and hoses safe on all types of hobbyist level machinery. Desktop CNCs, 3D Printers, Laser Cutters, and more. Easy Installation – Extends the life of wires, hoses, etc – Pieces can be added or removed for perfect fit – No need for end brackets, unlike competing brands. Best drag chain on the market!

Product Features

  • Dimensions: 0.5″T x 0.5″W Inner, 12″ Length
  • Material: Military Grade, Glass-Filled Nylon – Much Stronger Than Plastic Competitors
  • Made Entirely From Recycled Materials – Go Green, Save a Monkey!
  • Made in the USA: Designed and Manufactured in Northern California by Cable Monkey
  • Cable Track, Cable Carrier, Drag Chain – For CNC, 3D Printers, and other machinery

Detailed Information available on our Homepage…

1 Roll 6″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

Scorpion Flexible Nylon 3D Printing Filament 1.75 mm, 400 grams Made in the USA

A Flexible Nylon 3D Printing Filament (1.75 mm, 400 g) Makers will appreciate the easy printing and densely smooth feel of projects created with Scorpion. Our flexible nylon has fantastic interlayer adhesion. It is very strong and depending on the layer height, projects made with Scorpion can bear high forces and weight bouncing back with no damage from repeated stress. In testing, we lifted over 20 kg (44 lbs) with a handle created from the flexible nylon. ***Nylons are sensitive to water and humidity!*** Always keep in an airtight, waterproof container when not in direct use (ex. ziploc) and include a desiccant bag. If filaments are exposed to moisture, follow typical drying instructions in an oven for nylon filaments. ***It is recommended to dry nylons before printing with them for optimal quality*** Printing temperature: 225°C-235°C Print Speed: Maximum is 50 mm/s Layer heights:tested for 0.1 mm and above Printer Bed Instructions Heated bed is not necessary if you use a BuildTak bed and PVA glue. This combination produces the best quality prints with good adhesion and no peeling of the edges. If you have a heated bed, keep it at 55-60°C. and blue painters glue. A heated bed is a good alternative to the BuildTak + glue combo. Printing with neither a heated bed or BuildTak is not recommended as the edges of prints can pull up. This is fine for quick prints but not for your final designs. Glue necessary?: Yes. We recommend using a PVA glue (regular glue stick or Elmer’s washable glue) on the printer bed in order to strengthen adhesion of the first layer. Do this regardless of your printer bed substrate. Tape?: Yes, as with the glue, we recommend using blue painter’s tape or similar to create a good gripping surface for nylon.

Product Features

  • Flexible 3D Printing Filament
  • Work with most of desktop FFF/FDM 3D Printers
  • VERY strong interlayer adhesion – Easy to print
  • Comfortable wearable texture great for projects that need to be against the skin for long periods of time (bracelets, electronic wearables, cosplays)
  • Printing temperature: 225°C-235°C

Check Out Our Website For Details…

Cable Track – MEDIUM (Drag Chain), 0.75″x0.5″ Inner, 12″ Length – Made in the USA

The new Cable Monkey Cable Track! Cable Monkey started producing their very first cable track using a high quality, military grade, recycled glass filled nylon material. This made for a strong, long lasting cable carrier that will keep your cables and hoses safe on all types of hobbyist level machinery. Desktop CNCs, 3D Printers, Laser Cutters, and more. Easy Installation – Extends the life of wires, hoses, etc – Pieces can be added or removed for perfect fit – No need for end brackets, unlike competing brands. Best drag chain on the market!

Product Features

  • Dimensions: 0.75″T x 0.5″W Inner, 12″ Length
  • Material: Military Grade, Glass-Filled Nylon – Much Stronger Than Plastic Competitors
  • Made Entirely From Recycled Materials – Go Green, Save a Monkey!
  • Made in the USA: Designed and Manufactured in Northern California by Cable Monkey
  • Cable Track, Cable Carrier, Drag Chain – For CNC, 3D Printers, and other machinery

Detailed Information available on our Homepage…

3D Printer Cufflinks, Wood Cufflinks Hand Made in the USA

Our 3D Printer Cufflinks are perfect as a wedding gift, gift for dad, groomsmen gifts, or just an amazing conversation starter! Wooden Accessories Co crafts custom suit and tie wooden accessories with over 10,000 unique designs. Each item is hand made and laser cut to perfection in the USA. CUFFLINK DETAILS: – made only with premium cherry wood – cufflink circle is 14mm x 14mm – cufflink wood thickness is 3mm – comes with dapper packaging

Product Features

  • Modern Wood Cufflinks Hand Made in the USA
  • Materials: Made from premium cherry wood.
  • Dimensions: Cufflink circle is 14mm x 14mm. 3mm thickness
  • Covered in Wooden Accessories Co’s product warranty.
  • Laser cut designs with maximum precision and Hand Finished.

Detailed Information available on our Homepage…