This MK8 extruder is an open source universal suitable for most RepRap and DIY long distance feeding filament 3D Printers.
We have made the NEMA 17 Stepper motor with 4 wires which is specially designed for 3D Printer Controller RAMPS 1.4, so you just need to plug it in, and there you go! no need to buy from others and waste a lot of time trying to figure out how to connect them.
The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made all metal design to replace plastic parts bowden extruder.
(1) Compatible with ABS and PLA 1.75mm.
(2) NEMA 17 Stepper motor is included in this transaction.
While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!
(1) Nozzle : 0.4mm
(2) Voltage : 12V/24V
(3) Motor Model : SL42STH40-1204A
(4) Nozzle Flow Rate : 24cc / h
(5) Thermistor Tpye : NTC 100K 3950
(6) Sports Shaft Speed : 10-100mm
(2) Step Angle : 1.8Â°
(3) Rated Voltage : 2.55 V
(4) Rated Current : 1.7 A
(5) Phase Resistance : 1.5Î©
(6) Phase Resistance : 2.3 mH
(7) Number of Lead Wire : 10-100mm
- (1) Compatible with ABS and PLA 1.75mm.
- (2) NEMA 17 Stepper motor is included in this transaction.
- (3) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !
Visit The Website For More Information…
This SD Extension cable conveniently and inexpensively solves problem which makes the insersion and removal of cards in the SD slot very difficult. 3 kinds of cables to switch (SD to SD/TF to TF/SD to TF), free conversion. Let Upgrade navigation map card and music more convenient. You are deserve to have!
1 X Soft Flat FPC SD Extender Cable 18.9 inch
1 X WinterSweet Mark
1.The memory card not included.
2.The Extension Cable Card Read doesn’t support hot-plugging.
- ✔. The SD connection Cable is available long enough for most projects.
- ✔. Works perfectly.No more wear or tear on your hardware’s SD card port.
- ✔. It would allows the SD card to be recognized quickly.
- ✔. SD extender ribbon cable recognize cards larger than 32GB easily.
- ✔. Support for all products need to use the SD SDHC MMC RS-MMC Micro-SD TF memory Card extension cable 18.9 inch (128MB TO 64GB) Insert the SD card into the SD card slot of the extension cable, then Insert the SD adapter card into the machine (GPS,Car DVD,DVR,3D Printer,Camera,Raspberry Pi,Kindle,3D Mapping,Macbook,Arduino,TV kit, LED/LCD screen,Mobile phone/Smartphone,Outdoor advertising screen, Large minitoring instrument,etc.)
Detailed Information available on our Homepage…
ALUNAR 3D printer is a DIY 3D printer I3 kit that comes with all the 3D printer spare parts needed.
This printer is widely used in education, industrial design, school research, home use and much more.
Not only you can learn and know how the 3D printer works
and also you can make some really neat objects by this ALUNAR I3 3D printer.
However, we must tell you:
1.This 3D printer is in need of great passion,
patience and operational ability since it is a DIY kit, comes with all 3D printer spare parts.
2. This 3D printer is perfect for PLA 3D printing, without heated bed.
3.This 3D printer is a user-certified printer kit, it is fully normally functional,
if any problems during the assembly and use, please contact us immediately to resolve.
3D Printer Parameters:
Machine Size: 395*395*415mm
Packing Size: 500*460*150mm
Machine Weight:5.8 Kg
Gross Weight:8.0 kg
Printing Technology: FDM
Heated Bed: NO
Print Size: 150*150*150mm
3D Filament: PLA/PETG/HIPS/WOOD/TPU
Filament Diameter: 1.75mm
Number of Extruder:1
Printing Precision: 0.1-0.3mm
Printing Speed: 40-120mm/s
X Y Axis Speed: 500mm/s (MAX)
Z Axis Speed:5mm/s (MAX)
Operating System: Windows, Mac,Linux
Control Software: Repetier-Host，Cura
Display LCD: MINI 12864
Interface:USB /TF card（support offline print）
1* Black ALUNAR DIY 3D Printer Kit
1*3D Filament Spool Holder
and other spare parts
- First DIY 3D Printer Kit and Best Gift: classical black and unique blue versions for options.
- Optimized and upgraded extruder for easy and safe filament loading and high precision printing.
- Upgraded and certificated power adapter with power on and off switch make sure it’s so easy and safe to use the 3D printer.
- Over Heat and Over Time Protection:If the preheat time over the origin, the printer will alarm and stop working to remind you.It is much safer.
- Better modularization DIY parts and colorful sockets on main board for easier wiring and faster installation,so we can have fun and enjoy the assembly and get great learning experience.
Click Here If You Need More Detailed Info…
MP Select Mini 3D Printer
Too often, getting a low-cost 3D printer means getting a box of ill-fitted parts with poorly written and incomplete documentation. You end up spending hours on the internet, searching forums and asking for help to get the printer assembled and operating properly.
That isn’t how Monoprice operates and this 3D printer is a perfect example! This printer not only comes fully assembled, it has already been calibrated at the factory. All you have to do is perform a quick check to verify that the print bed is still leveled, in case it shifted during shipping, then load the included MicroSDTM card, load some filament, and start printing the preloaded model. Nowhere else will you find a 3D printer ready to print out of the box at such a low price!
Affordable 3D printing for everyone
All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA.
Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!
Heated aluminum build plate nozzle cooling fan for printing all filament types
Quick-release steel gear filament feeder
Easy to use color LCD
0.4mm extruder diameter
Complete kit with bed scraper, and MicroSDTM card with preloaded model files
Micro USB and MicroSD card connectivity
PC and Mac compatible
Compatible with Cura, Repetier, and other
- All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA
- Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
- Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory.
- We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!
- PC and Mac compatible. Compatible with Cura, Repetier, and other software
Click Here If You Need More Detailed Info…
Quantity: 1 Pc
Color: As the picture shows
1 Set Nail Perfect Kit(including a polish holder)
3 Sheets 3D stickers
100% brand new
Washable and reusable
Simple design and easy to use
Essential when applying paint, varnish to nails
Easy for novice to apply the polish on the nails, and won’t spill off the edge of nails
Different sizes of nails can also be satisfied
Ideal for professional and home use!
- Easy novice nail polish, which will not be painted to the edge of the nail.
- There are many types that can meet the demands of different nail sizes.
- Easy to use, fast, comfortable, give you a different experience. Allow you to create beautiful nail designs in short time
- Simply perfect for the nail art beginners as well as professionals
- What you will get:1 Set Nail Perfect Kit(including a polish holder),3 Sheets 3D stickers
Click Here If You Need More Detailed Info…