Tag Archives: MK2B

Bluedophin Reprap Ramps 1.4 kit + Mega 2560 + Heatbed mk2b + 12864 LCD Controller + DRV8825 + Mechanical Endstop+ Cables For 3D Printer

MK2B Heatbed MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants. Color: Red Size: 214mm x 214mm Etching: 35um copper Laminate: FR4 1.6mm Ramps 1.4 Controller Board This list is Pololu trillion rupiah , or ramps short. It was designed as a low-cost small package RepRap needs to accommodate the entire electronics . Oblique interfaces with the powerful Arduino MEGA platform Arduino Mega , and have plenty of room for […]

Read more

HESAI RED MK2B PCB Heatbed Hot Plate with LED and Resistor and Cable for Reprap Mendel Prusa 3D Printer Support 12V 24V

Specification: Power supply:12V or 24v Laminate FR4 1.6+-0.15mm Resistance between 1.0 -1.4 ohm(12V)or 3-5 ohm (24V) Item Size:214mmx 214mm Package List: 1× MK2B Heatbed with LED,Resistor And Cable Product Features It features a central mounting hole on the front side to allow for three point mounting Copper plated holes Compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed hese boards are all fully tested to confirm even heat distribution and correct resistance Weld LED,Resistor and Cable Visit The Website For More Information…

Read more

MK2B Heated Bed, NTC 3950 Thermistor & Borosilicate Glass Combo

Complete set: 214mm x 214mm MK2B with soldered thermistor, soldered power cord and 214mm x 200mm borosilicate glass plate. Product Features MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer Thermistor included: 100K ohm NTC 3950, soldered and installed Borodilicate Glass: 3mm thick, 214mm x 200mm, will not interfere with MK2B mounting screws Soldered power leads Red soldermask and white silkscreen on both sides Visit The Website For More Information…

Read more

Wangdd22 3D Printer Parts 100Kohm NTC3950 Thermistors with Cable for 3D Printer Reprap Mend RAMPS 1.4 A4988 MK2B Heatbed(Pack of 10)

Specifications: Negative temperature coefficient (NTC) thermistorR @ 25: K100K-1%B25 / 50: K3950-1%Element: thermistor type MJB2 Characteristics: Resistance value: R (25 ° C) = 100K ± 1%Resistance tolerance:± 1%B value R25/50:3950kOperating temperature range:-40° C ~+ 300 ° CTemperature coefficient of resistance:-2 ~ -5% ° CMaximum rated power:45mWDissipation power coefficient:>5mW/° CThermal time constant:≤7S Colour:Milky whiteLine length:1m Package Includes:10Pcs 100K temperature sensor Product Features High sensitivity and quick response; Compact structure, easy installation; Wide temperature range, good stability, high reliability; Teflon wire is twice thicker than other similar products in […]

Read more

RepRap Champion MK2B PCB HeatBed Heat Bed RepRap 3D Printers pre-wired for 12V SMT LED soldered

MK2B comes with pre-soldered SMT LEDs and wiring. PCB pre-wired for 12V power. Specifications: Outer Dimensions: 214mm (8 7/16 in) x 214mm (8 7/16 in) Dimensions between holes: 209 x 209mm Laminate FR4 1.6+-0.15mm 2 Layer, 35µm Copper White Soldermask – Both Side Black Silkscreen – Both Side Power Input: 12V/24V DC Copper Plated Holes Wiring length: 700mm Package contents: 1 x MK2B PCB Heated Bed pre-wired for 12V power. Product Features Popular MK2B 200x200mm dual power heated bed design Compatible with most Prusa i3 variations, Mendel, […]

Read more
1 2 3 6