EAONE 12pcs M6 3D Printer (2x 0.2mm/ 2x 0.3mm/ 6x 0.4mm/ 2x 0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot


EAONE 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot

Specification of Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Attention: Small parts, keep away from children

package including:
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
6x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head

Product Features

  • 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot
  • Compatible with all 1.75mm pla abs printer
  • Material: brass
  • Input diameter: 1.75mm; Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
  • Installation: external M6 thread connection

Detailed Information available on our Homepage…

TIANSE 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit, 5PCS

★Don’t use the drill to clean until the nozzle is heated to above 200 degrees.

Product Features

  • Bit Diameter: 0.4 mm – Bit length: 16 mm
  • Length of Shank: 20 mm
  • Package Included: 5 x 0.4 mm Drill Bits
  • 12-month warranty and 24*7 customer support with technical advice
  • ★Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here If You Need More Detailed Info…

3d Printer Nozzle Cleaning, 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit by EAONE


EAONE 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

Specification
Type:drill bit
Material: silicone
Bit diameter: 0.4mm
The length of drill: 8mm
The length of shank: 20mm
Color: Random

Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Package include
10 x Drill bits

Product Features

  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Diameter: 0.4mm; The length of drill:8mm; The length of shank: 20mm
  • Color: Random
  • Package includes 10 pack of 0.4mm drill bits
  • Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Detailed Information available on our Homepage…

M-jump Metal J-Head V6 Hot End Hotend Extruder for RepRap 3D Printer 1.75mm Filament Direct Feed Extruder 0.4mm Nozzle With 12V fan and 1 m PTFE Tube

Description:
*With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
*This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
*Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C
to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
NTC 3950 Thermistor parameters:
-Thermistor temperature value table for Marlin
-Small Size: 1.25mmx2.0mm glass bead
-High accuracy: 1%
-Resistance value at 25°C=100K
-Wiring insulation: high temperature teflon/PTFE
-Wiring length: 1 meter Specification:
-Type: Bowden V6 J-head
-Thermister: 100K NTC
Package include:
-1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
-1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
-1 x One Meter long Bowden tubing 4mm OD 2mm ID
-1 x PC4-M6 Straight Fitting

Product Features

  • Metal J-head Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer.Included: NTC3950 thermistors and 12V 40W heater
  • This Hotend with High Temperature Performance, you can reach over 280C
  • Hotend can be used for both: direct feed and bowden applications. Good for ABS, PLA and other conventional print materials
  • This hotend is equipped with stainless metal heatbreak and with PTFE liner inside heatbreak to reduce extruder jamming
  • 1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor. 1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A 1 x One Meter long Bowden tubing 4mm OD 2mm ID. 1 x PC4-M6 Straight Fitting

Click Here For More Information

Pack of 7 pcs 1.75mm Nozzle 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm + 4 DIY Tools 3D Printer Nozzle UM2 Makebot MK8 Nozzle Tool for Nozzle replacement, Spanner, Installation tools

This is a tool set with nozzle for FDM 3D printer.
The 3 in 1 Screwdriver can be a “-” or “+” Screwdriver for tending your printer, also it can use for nozzle replace with spanner.
It is protect your hands far from hot nozzle. Make you to replace nozzle easy and very fast.
7pcs High quality precision brass nozzle made by High-precision CNC.
6 size include almost of nozzles, they are 0.2mm, 0.3mm, 04mm, 0.5mm, 0.6mm, 0.8mm.

HOW TO REPLACEMENT NOZZLE
Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280).
Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don’t touch by hands!!!
Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done.
Notice: NOZZLE and Heat Block on 3D printer need heat before take out, don’t touch it by hands when printer is heading or close less than 10 mins.

3d Printer nozzles
0.2mm * 1pc
0.3mm * 1pc
0.4mm * 2pcs
0.5mm * 1pc
0.6mm * 1pc
0.8mm * 1pc

Installation / Replacement Tools:
Hand Shank * 1pc
Simple Spanner * 1pc
Socket Spanner * 1pc
2 in 1 Screwdriver * 1pc

Product Features

  • ALL SIZE NOZZLES: Pack of 7pcs precision brass nozzle in 6 sizes, 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
  • Multi-Function Tool: Make renewal nozzle and repair your 3D printer easy
  • EASY TO REPLACE NOZZLE: 3 in 1 screwdriver and spanner make you more easy, fast and safe to replace nozzle.
  • The simple spanner only work for Heating block on MK8 !!
  • Nozzle replacement need heat the Heat Block, don’t touch it by hands when it is heating or stop heating less 10 mins. Tools maybe rust but it will no impact on use.

Visit The Website For More Information…