M-jump Drill Bits for 3D Printer Nozzle Cleaning Kit 10 pack (0.1mm-1.0mm) 3D Printer Kit Extruder Nozzle Head Cleaner Bits

These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly.
These micro dtill bits are of the highest quality.They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If
you need another size or have any questions, contact us and we will take care of you.
One of each size: 0.1mm 0.2mm 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.7 mm 0.8 mm 0.9 mm 1.0mm
Note: These bits are good quality but too tiny, specially for size of 0.1mm 0.2mm 0.3mm, it is very fragile for handling, so please be careful and take good control of your CNC speed.

Product Features

  • 10 pack:0.1mm 0.2mm 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.7 mm 0.8 mm 0.9 mm 1.0mm
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • 10 pcs for diffrent colors
  • Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here If You Need More Detailed Info…

Witbot Double V Slot stainless steel Passive Round wheel with Bearings Idler Pulley Gear Perlin Wheel 3D Printer parts ( Pack of 5pcs)

Specification::
Inner Diameter: 5mm
Outer Diameter: 24.39mm
Height: 10.23mm
Net Weight: 25g/pcs
Color: Silver

Package content:
5*Wheels with Bearing

Product Features

  • Test one by one, high quality
  • Inner Diameter: 5mm
  • Outer Diameter: 24.39mm
  • Height: 10.23mm
  • Durable and flexible

Visit The Website For More Information…

3D Pen/3D Printer Filament,1.75mm PLA filament Pack of 24 Different Colors,High-Precision Diameter Filament, Each color 10 Feet, total 240 Feet Lengths by Mika3d

* 1.75mm Premium PLA Filament: High-Precision Diameter, Smokeless and Toxic Free
You will love our 24 Unique colors 3D Filament, It Keeps your 3D Pen and 3D Printer Printing Smoothly

# Specification:

Material: PLA 3D Filament( Polylactic Acid)
Diameter: 1.75mm
Diamter Tolerance:+/-0.03mm
Printing Temperature: 356-410℉(180-210℃)
Quantity: 24 colors, Each Color Length is 10 feet, Total 240 feet Packed in One Bag
Package:Total 24 Colors Packed in One Vacuumed Sealed Bag

24 Color List:
Metal Golden- Metal Silver–Metal Bronze
Natural- Transparent Red–Transparent Yellow- Transparent Blue-Transparent Purple-Transparent Green
White- Yellow- Orange- Red- Bright Green-Dark Green- Bright Blue
Blue-Cyan-Pink- Purple- Light Grey- Dark Grey- Brown- Black

* Warranty & 100% Satisfaction Guarantee: We are confident about our PLA Filament quality, Contact us if you have any problem with the Item, Within 24 hours response,We are always here to serve you!

Click “Add To Cart” above Now, to Create 3D Art and Start Your 3D Printing Now!

Product Features

  • Unique 24 Colors:It comes with 3 Metal Colors, 6 Transparent Colors and 15 Normal Various Colors; It’s Great Gift for 3D Printing
  • High Qulaity:Our PLA Raw Material Imported from USA, It’s 100% New Virgin, Produced at No-Dusty Workshop, Premium Quality Controlled
  • Good Performance:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily
  • Strong Compatibility:Universal compatible with most 1.75mm 3D Pens/3D Printers on market
  • Warranty:We are Confident about PLA Filament quality,Within 24 hours response,100% Satisfaction Guarantee

Click Here For More Information

BIQU GT2 16Teeth 3mm Bore Aluminum Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)

Specifications:
Number of tooth: 16T
Bore Diameter: 5mm
Net Weight: 3g/pcs
Material: Aluminum

Package Included:
5*20T GT2 Timing Belt Pulley

Product Features

  • Use for GT2 6mm Wide Timing Belt
  • Number of tooth: 16T
  • Bore Diameter: 3mm
  • Net Weight: 3g/pcs
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions

Detailed Information available on our Homepage…

Teenitor 3D Print Removal Tools with Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 5

Weight:0.12kg
Material: Stainless steel with wooden handle
Color: Brown
A great tool for your 3D printer-Stiff, flexible,rigid,functional,effective with 5 pieces, this set of tool minimizes damage to the printing surface.At the same time, the thicker neck is useful for removing rafts and for trimming off supports
Directions for Use
To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle. Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print. When tilting the blade, twist the handle counter-clockwise if you’re working from the right side of the print. (If you are left-handed and starting from the left, twist the tool clockwise)
If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Repeat until the corner lifts up enough to allow the blade to start getting under the print
If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat
If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool

Product Features

  • Enhanced version pack of 5: it includes 5 sizes.you can choose a suitble one to help with prying out printed items.
  • Thicker neck,not bent easily:It needs to be just a bit stiffer to loosen a stubborn print,but it doesn’t damaged any of your projects your my printer bed by using it.
  • Fantastic and versatile:Although it’s marketed as a 3D print removal tool,it also very useful for removing stickers and scraping the small amounts of filament you tend to get stuck on the bed from not having a level bed, and it helped remove the painters tape residue left from the tape.Works very well to remove freshly printed parts
  • Durable and stiff: Note that this isn’t made for prying the print off the bed like you would use a putty knife. It’s more for sliding under the print and unsticking as you go, or perhaps slipping the middle under the print and “sawing” the print off. It’s thin and flimsy which lets it get under the print, but not TOO flimsy – it’s also thick enough to be durable, assuming you aren’t prying. Prying would definitely ruin this tool.This tool is that much better than trying to use something else
  • Flexible and effective:This 3D Print Removal Tool Works super well,A must have for a 3D printer. It’s great for getting prints off your print surface without damaging their bases.it is very simple and extremely effective. Seems to be very well constructed and the blade is flexible but doesn’t get bent up easily;it has a very flat top which makes removing models really easy.

Click Here If You Need More Detailed Info…