Best 3D Printing Build Surface – 8×8 Square Bases – Bin the Blue Tape, Kapton Tape and Hairspray, No Prep 3D Printer Base

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Compatible with: E3D V6, makerbot mk8, Anet A8/A6, RepRap, mendel, Prusa i3, P3Steel 3D Drucker printer and many more 3D printers!
Extreme Hold for: ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE)

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Check Out Our Website For Details…

Robot House DIY Drawing Robot Kit Writer XY Plotter iDraw Hand Writing Robot Kit Based on 3D Printer Corexy or Hbot Structure support Laser Engraver

Only the two motors and a synchronous belt to complete the XY plane movement. Colorful layers of writing.

It can mimic human handwritten note.
It is the liberation of manpower for people with large number of copying job.

Support laser engraving by adding laser connector. PS: laser extension package excluded, so you need to buy laser extension.

Product form: spare parts, need to be assembled.
Size: 45 x 50 x 10cm
Power supply:DC12V 1A, 110-220V
Communication: USB serial communication, not support offline.

Work mode: writing, painting, laser engraving (need to buy laser extension separately)

Working area: A4, 210x297mm

Support system: Window Mac

File type: direct input, drawing or SVG JPG BMP PNG DXF
Positioning accuracy: 0.2mm
XY movement accuracy :0.2mm
Motor drive: high precision 42 stepper motor 16 subdivision A4988 drive
Operating software: InkscapeV0.91

Main control board: Exclusive Drawcore main control board compatible with EBBV2.3

Fixed code type: C, with latest EBB firmware

We have very detailed teach video. Please contact seller for Software and user manual after payment.

Product Features

  • FOR DIY, Assemble needed. Improved the power signal on the main control board. Laser connector added. PS: laser extension package excluded, so you need to buy laser extension. ASIN for laser package: B06XBYNP5R. Please search it directly.
  • Integration function board with lead-free process. Hbot structure. Main frame made from acrylic. Light and stable.
  • A research tool for geeks, creators, DIY enthusiasts, students, teachers, automation researchers, etc.
  • No need to program or weld. Install easily by hand. Software , user guide and assemble video are provided.
  • If you want to add features, we provide you open source interface documentation. Shipped by DHL

Visit The Website For More Information…

Arduino 3D Printer Controller Kit – Mega 2560 Board, 3D Printer Controller RAMPS 1.4 Board, 5 Steppers, SD Card Slot, 12V, 180W

Build your own 3D printer controller kit and print all your 3D designs via G-codes on your SD card without the need of a PC.

Manufacturer SpecificationsManufacturer_Specifications
GeneralgeneralMax power supply for these ramps: 12VMax watts for these ramps: 180WMax watts for the hotbed: 100WMax temperature for the hotbed: 50 Degree CelsiusThis kit consists of a RAMPS 1.4 shield, an Mega 2560 board, five Stepper drivers and a LCD.It can control up to 5 stepper motors with 1/16 stepping precision and interface with a hotend, a heatbed, a fan (or a second hotend), a LCD controller, a 12V (or 24V with appropriate modification) power supply, up to three thermistors, and up to six end stoppers.RAMPS 1.4 shield is a popular control board for RepRap Prusa i3 3D compatible printer.A4988 Stepper Motor Driver is built-in translator for easy operationLCD 12864 with Controller contains an SD-Card reader, a rotary encoder and a 128 Character x 64 Line LCD display.
Dimensionsdimension_infoArduino Board Dimensions: 115x 50x 9mm (L x W x D)Arduino Board Weight: 35g3D Printer Controller Board Dimensions: 105x 60x 20mm (L x W x D)3D Printer Controller Board Weight: 68gWeight/dimension is for the main item of this boxed product, to help you compare product sizes before buying: please do not base your shipping calculations on this price – shipping prices depend on your cart contents, shipping destination, and shipping method: please use the checkout to select options and preview shipping price for your total order.
Product NotesProduct_NotesDo not plug or unplug and wire or module when power is on, do not even touch the board when power is on or your hand has static charge(you can remove static charge by touch

Click Here If You Need More Detailed Info…

chonlakrit 3D Printer Parts General Add-on Heated Bed Power Expansion Module Electric Board

Package Included: 1 x Heat Bed Expansion Power Module(motherboard is not included)

Product Features

  • Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful. With this add-on module to board lead the maximum current up to 25A.
  • Max Current: 25A(Enhance heat dissipation)
  • Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″

Visit The Website For More Information…

Orion Motor Tech PLA 3D Printer Filament 1.75mm Diameter 1kg 2.2lbs (transparent)

Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results. PLA materials are extruded with great precision, which means better looking prints, less calibration and fewer extruder failures. The materials will work flawlessly with most 3D extruders currently in the market.

Specification:
Material: PLA
Density 1.25g ± 0.05g/cm³
Melting Point: 180℃ (356°F)
Tensile Strength: ≥60MPa
Bending Strength: ≥60MPa
Notch Impack Strength: 4.53 lbs / ft2
Distortion Temperature: 60℃(140°F)
Printing Temperature: 190°C – 220°C (374°F – 428°F )

Product Features

  • Made of PLA (Polylactic Acid) material of premium quality, no kinks or breaks
  • Work flawlessly with most 3D extruders/printers currently in the market
  • Recommended printing temperature is 190°C – 220°C (374°F – 428°F )
  • Superior materials ensure better looking prints, less calibration & fewer extruder failures

Click Here For More Information