Ifun 3D printing filament Carbon Fiber which compatible with all major 3D printers 1.75 mm 1KG(2.2LB) black -Quality raw material- Top Dimensional Accuracy +/-0.03 mm for your wonderful masterpiece

Parameter:

Printing recommendation:typical ranger

Extrude temperature:220-240℃

Printing speed:30-100mm/s

Bed temperature:100-120℃

Diameter:1.75mm

Nozzle: we currently recommend minimum 0.4mm

Weight:1KG

Gross weight:1.4KG

Density:1.29g/

Glass transition temperature:60℃

Melt index:4.5g/10min

Tensile strength:31.2Mpa

Elongation at break:6.3%

Bending strength:40.2Mpa

Bending modulus:2200Mpa

Izod impact notched:5.5KJ/ M

Heat distortion temperature:57℃

Flammability:HB class

Printing recommendation


Extruder temperature:210-230℃

Printing speed:30-100mm/s

Bed temperature:room temperature-50℃

Layer Height:0.1-0.2mm

Infill: As needed up to 100%

Matters need attention:General printing

Product Features

  • The raw materials of carbon fiber are imported from Japan Toray corporation.Premium quality raw material.Good flexibility and Better physical performance than usual ABS or PLA filament, High stiffness and toughness and Surface durability.
  • Because of the carbon fiber composition, the strength of the material is greatly enhanced, The physical properties of the 3D filament are much better than those of ABS or PLA.
  • Low shrinkage and Excellent dimensional stability. stable melting point and low brittleness.
  • Environment friendly and biodegradable.
  • High resolution and the tolerance could been controled in 0.03 mm, It is stable and smooth.

Check Out Our Website For Details…

UEB P802M P802E Auto Leveling Position Regulator Sensor for 3D Printers

Specification:
Sensor Work Range: 8mm±15%
Work Voltage: DC 6-38V
Suitable for: 3D Printers

Package inckuded: 1 X Auto Leveling Position Sensor

Product Features

  • Sensor Work Range: 8mm±15%
  • Work Voltage: DC 6-38V
  • Suitable for: 3D Printers

Detailed Information available on our Homepage…

Jili Online J-Head V5 Extruder Hotend Set for 0.4/1.75mm Filament Extruder 3D Printers

Description:

– The heating pipe is a high quality stainless steel material, fine workmanship, high temperature resistance, rugged, specially designed for 3D printers.
– Feed smoothly, install the trachea connector switch, so that the operation more convenient, one-hand operation can be installed, diameter 45 ℃ bevel, to ensure that no leakage material.
– Aluminum with NTC detection, the product work fine, with 24 thick line, the detection nozzle temperature.

Specification:

– Material: steel + copper
– Size: Special size
– Applicable: 3D printer

Package Includes:

1x Hotend Extruder

Product Features

  • The heating pipe is a high quality stainless steel material, fine workmanship, high temperature resistance, rugged, specially designed for 3D printers.
  • Feed smoothly, install the trachea connector switch, so that the operation more convenient, one-hand operation can be installed, diameter 45 ℃ bevel, to ensure that no leakage material.
  • Aluminum with NTC detection, the product work fine, with 24 thick line, the detection nozzle temperature.

Visit The Website For More Information…

Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Dark Purple

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What other colors are available?
PLA comes in a variety of different vibrant colors, 29 different options total.
*New fluorescent colors are available. They glow under UV light, commonly known as black light.
*New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color.

Product Features

  • 3mm diameter, 1kg net weight, PLA Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 200 – 210°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

UEB Semi-Enclosed Interior Opening 10×10 Drag Chain Towline for 3D Printers

Specification:
Type: Interior Opening 10x10mm
Suitable for: 3D Printer Accessory
Material: Industrial Nylon
Length: approx. 1m/3.28ft

Package inckuded: 1 X Drag Chain

Product Features

  • Type: Interior Opening 10x10mm
  • Suitable for: 3D Printer Accessory
  • Material: Industrial Nylon
  • Length: approx. 1m/3.28ft

Detailed Information available on our Homepage…