Best 3D Printing Build Surface – 8×8 Square Bases – Bin the Blue Tape, Kapton Tape and Hairspray, No Prep 3D Printer Base

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Compatible with: E3D V6, makerbot mk8, Anet A8/A6, RepRap, mendel, Prusa i3, P3Steel 3D Drucker printer and many more 3D printers!
Extreme Hold for: ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE)

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Check Out Our Website For Details…

Z-ULTRAT 3D Printing Filament Pure Black 1.75mm 800g

Z-ULTRAT Filament

Z-ULTRAT – dedicated plastic filament for 3D printing with Zortrax M200. Material with high hardness level, low elasticity and low level of deformation. Excellent for printing architectural models, utility models and working parts in machine prototypes. Perfectly imitates the properties of materials used in mass production.

The use of Z-ULTRAT filament with Zortrax M200 3D printer and dedicated Z-Suite Software allows you to generate easily removable support for the model. Single Extruder Support technology allows you to print complex models without the use of additional extruder or material.

Specifications:

Color: Pure Black

Printing technology: LPD (Layer Plastic Deposition)

Dedicated device: Zortrax M200 3D Printer

Features: Durable and strong, suitable for prototyping mechanical parts, architectural models, design prototypes

Weight: 1 kg (2.2 lb) gross wt. / 800 g (1.76 lb) net. wt.

Efficient melting point for 3D printing: 269 – 279 °C [516 – 534 F]

Glass Transition Temperature: 144 °C [291 F]

Vicat Softening Temperature: 130 °C [266 F]

Thermal Expansion: Minimal

Odor: Nearly odorless

Hazards: Product does not present any hazard while operating

Product Features

  • Z-ULTRAT – dedicated plastic filament for 3D printing with Zortrax M200. Material with high hardness level, low elasticity and low level of deformation.
  • Excellent for printing architectural models, utility models and working parts in machine prototypes. Perfectly imitates the properties of materials used in mass production.
  • The use of Z-ULTRAT filament with Zortrax M200 3D printer and dedicated Z-Suite Software allows you to generate easily removable support for the model.
  • Single Extruder Support technology allows you to print complex models without the use of additional extruder or material.
  • Now available in 7 colors – Blue, Green, Ivory, Red, Yellow, Pure Black & Cool Grey. More to come.

Check Out Our Website For Details…

SemiFlex TPU 3D Printing Filament – 1.75mm .50kg – SNOW

SemiFlex 3D printing filament boasts flexibility, strength and reliability for your 3D printing projects. The slightly more rigid composition vs traditional NinjaFlex allows for increased tensile strength. In some cases the more rigid composition supports ease of printing in certain printers.

Suggested Applications: snap-fit parts, high resolution text, active hinges
SDS &

KEY FEATURES:

  • Shore Hardness = 98A
  • 600% elongation provides significant flexibility
  • 75% greater tensile strength vs the most flexible products;
  • Patented low friction exterior allows for smooth feeding
  • Consistent diameter and material properties providing reliable, high quality prints
  • Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  • Adheres to most build platform materials (painter’s tape can help)
  • REACH and RoHS 2002/95/EC Directive compliant

PRINTING GUIDELINES:

  • Extruder Temperature:  225°C – 235°C
  • Platform Temperature: 80°C – 110°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.
  • Print Speed: 
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) 
    Layer 2+ use cooling fan if available.

Product Features

  • 600% elongation provides significant flexibility
  • 75% greater tensile strength vs the most flexible products;
  • Shore Hardness = 98A
  • Suggested Applications: snap-fit parts, high resolution text, active hinges
  • Patented low friction exterior allows for smooth feeding

Check Out Our Website For Details…

ToBeter 3D Printing Pen with LCD Screen for 3D Drawing and Doodling with 3 Loops of ABS Filament Material, Power Adapter, Manual – Yellow

THANK YOU FOR SHOPPING THE BEST 3D PRINTING PEN IN ToBeter!

3D pen is a great tool for anyone interested in 3D creation – from the newbie to expert, The only limitation of 3D drawing is your imagination!

Instructions:
1. The power adapter plug into an AC power outlet, then plug in the DC “Power jack” hole, yellow LED indicator lights, a pen and start standby.
2. Press the “Forward” button, the red LED light pen is warming up.
3. The consumption of materials into the “plastic insert port ” which is at the end of the pen, the other hand holding at the time of pressing the “forward” button, the material will be loaded from the built motor. Wait a plastic liquid from the nozzle tip out, feeding is successful.
4. Drawing. (Speed controller can be adjusted according to the amount of the moving speed of the spray, without the use of hands)
5. In order to secure your drawing Do not touch the nozzle and heating element.
6. If you stop using within 5 minutes, the device will switch to standby mode. “Work Lights” turns off, when used again, you need to press the “forward” button to restart.
7. When the need to uninstall or change the material, repeat steps 2 and continue to press the “reverse” button

NOTE!
1. The device is suitable for children over 7 years and adults, children should be used under adult supervision.
2. Drawing pen and nearby areas are dangerously hot zone, do not touch the tip with your hand or touch someone else’s nib objects
3. Do not block the line of foreign matter contained in the hole
4. Do not use other companies’ unofficial power adapter
5. Do not use unofficial supplies purchased from other companies.
6. The device belongs to sophisticated electronic equipment, can not be flooded.
7. After use, to prevent falls or child touch and keep in a safe place.

Product Features

  • PERFECT AFTER-SALE PROTECTION : Please ensure the packaging is properly intact before signing. If there is any damage of the commodity,please contact with us for a replacement, This 3D pen has 18 months warranty. For help, please contact us.
  • DEVELOP IMAGINATION: The 3D pen is a great tool for anyone interested in 3D modelling. It is a great gift for any occasion! The only limitation of 3D drawing is your imagination! 3D printing pen is perfect for children above 8 years old and adult no matter you are artists, hobbyist or creative lovers.
  • DESIGN OF INTELLIGENT STANDBY FUNCTION: The product will automatically switch to standby mode in 5 minutes,when you rest in operation or forget to turn off the power,the heating ring will stop working.When restart, the product begin to heat up, to avoid the risk of forgetting turn off the power.
  • DESIGN OF TEMPERATURE REGULATION AND CONTINUOUS SPEED REGULATION: The function of regulating temperature has been increased. Users can adjust by themselves,according to different consumptive materials,to achieve the desired temperature.Users can govern speed through hands movement,act freely when painting stereograph,to created the perfect works.
  • Included: 3D stereoscopic printing pen; 12V 3A Power Adapter; 3 Loops of ABS Filament Material

Check Out Our Website For Details…

DIY 3d Printer Kit Square Full Metal Large printing size 260X260X350 with Auto Level heated Bed Precision

The configuration of the Square 3d printer is as follows:

Colour: Black
Model: Metal frame Square 3d printer

Features:
1.European standard 2020 Aluminum structure
2.High strength acrylic sheet
3.Integrated Motherboard
4.High precision Y-axis position plate,guarantee Y-axis positioning accuracy.
5.Detailed assembly and use manul,easy for everyone
6.With 2 roll filament free 7.Full manufacturer’s warranty fulfilled by 3Dprintinghome, and lifetime support provided by expert our technicians

Technical Specifications:
Printing Color: Single color.
Extruder: E3D V5 long distance J-head.
Material: PLA, ABS,WOOD,HIPS,PVA,Nylon,poly,TPU
Nozzle diameter: 0.4mm.
Filament diameter:1.75mm.
Layer resolution:0.05-0.4mm
MAX printing Speed:150 mm/s.
Max build size:260*260*350mm.
Positioning accuracy: Z 0.004mm, XY 0.012mm.
MAX extruder temperature: 260°C.
Heating bed temperature: 70-100°C.
Power: 200W.
Connection: SD card or USB.
The file print format: STL,G-Code.
Equipment size: 750X 350 X150mm.
Package size:750X 350 X150mm.
Package weight: 10kg.
Warranty: 1 year warranty for the 3d printer
Support: Engineer teach support how to use it.

About shipping:
① Modular packaging,scientific packaging design, each part will be carefully protected to ensure safe arrival.
② In the package,include all Square 3d printer kits,The heated print bed,2 rolls of filaments,assembly manual,user manual, software, 2G SD card,another more 3d printing nozzle and 1 rolls masking tape.
③ Fast DHL express shipping

Product Features

  • The Aluminum structure Square 3d printer kit include:
    √The heated print bed
    √Auto level system
    √One switch power 12V 30A
    √2 rolls of filaments
    √Another spare nozzle
    √SD card
    √LCD Display
  • Aluminum alloy frame construction meeting European design standards, together with High quality of the nuzzle and heated bed, making the printing process stable and accurate
  • Z-axis with dual motors,more powerful,Y-axis positioning system, innovative design, higher printing precision.
  • Complete set of 3d printer packages, Detailed assembly and using manual, easy to calibrate and print
  • Fast international express shipping, timely and professional post-sale service

Click Here If You Need More Detailed Info…