EasyULT 6 Pack Makerbot Designed Mechanical Endstop Kit Is For 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
High quality connection, using 22AWG wire
Inside of copper wire is very thick, can be resistant to current 2A or 300V voltage
A wide range of temperatures, up to 80 degrees
Tips: In normal circumstances, the system must be configured to three mechanical
Length of Cable: 70 cm
Quantity: 6 set

Product Features

  • Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications.
  • Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
  • Pros: Easy to install, the more common styles.
  • Not easy to pull off, easy to install
  • tips: Under normal circumstances, the system must be configured to at least three mechanical switches.

Click Here If You Need More Detailed Info…

[Sintron] 3d Printer Kit , Ramps 1.4 + Mega 2560 + 5pcs A4988 Stepper Driver w/ Heatsink + LCD 12864 Smart Controller + 3 Pcs End Stop + Mk2b Heat Bed + 2 Pcs Pulley + 2m Gt2 Belts for Reprap Prusa i3

Overview:

This kit is a good start for starter to build your own 3D printer. basically once you get the electronic parts done. then later it would be more easier to complete the rest parts.and yes, this is almost all the electronics you need for your 3D Printer.(except motors and extruder hotend)
If you are not sure what you need to complete your 3d printer project, please feel free to ask. We not just sell them, we also provide professional after-sales service, We will offer you a detailed tutorials including project introduction and their source codes. so welcome to discuss with us, we will try to do technical support as much as we can.

(1)3D Printer Controller RAMPS 1.4 – You can check:https://www.amazon.com/dp/B06WP5DDP1

(2)Mega 2560 R3 – You can check:https://www.amazon.com/dp/B00E94CGTQ

(3)LCD 12864 Graphic Smart Display Controller – You can check:https://www.amazon.com/dp/B00L72FAZU

(4)A4988 Stepper Motor Driver with Heatsink – You can check:https://www.amazon.com/dp/B00JXGT1G6

(5)Mechanical Endstop Switch – You can check: https://www.amazon.com/dp/B00OCFEZ1O

(6)2M GT2 Belt + 2 pcs GT2 20 Tooth Pulleys – You can check: https://www.amazon.com/dp/B00OFUZSP8

(7)MK28 Heatbed:This is the latest version of MK2B,100% compatible with all Prusa and Mendel 3d printer variants.

Package List:

(1)3D Printer Controller RAMPS 1.4 x1
(2)Mega 2560 R3+USB Cable x1
(3)A4988 Stepper Motor Driver with Heatsink x5
(4)LCD 12864 Smart Controller x1
(5)MK28 Heatbed with Thermistor and High Temp Wire x1
(6)Mechanical Endstops x3
(7)2M GT2 Belt+20 Tooth Pulleys x2
(8)Smart Adapter x1
(9)30cm Cable x2
(10)Storage Box x1

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1

Click Here If You Need More Detailed Info…

[REPRAPGURU] 12864 LCD Full Graphic Smart Display Controller for RepRap RAMPS 1.4 3D Printer Mendel Prusa Arduino Mega Pololu Shield Arduino RepRap

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Features
(1) Using a large screen 12864LCD.
(2) With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
(3) Product comes encoder parameter adjustment can be achieved, and the file selection print.
(4) Plug and play on the RAMPS, but need to modify the firmware to support.
Package List Includes
(1) LCD 12864 Smart Controller x 1
(2) Smart Adapter x 1
(3) 30cm FC Cable x 2

Product Features

  • USA Customer Support
  • Print from SD card
  • Plug and play on the RAMPS 1.4, (with supporting firmware)
  • Using a larger screen 128X64

Detailed Information available on our Homepage…

24V Diamond Hotend Multi Color Hot End 3 IN 1 OUT Extruder For Reprap Prusa I3 Rostock Extruder 3D Printer kit 0.4mm/ 1.75mm

24V Diamond Hotend Multi Color Hot End 3 IN 1 OUT Extruder For Reprap Prusa I3 Rostock Extruder 3D Printer kit 0.4mm/ 1.75mm

Detailed Information available on our Homepage…

New Filament Monitor Desktop 3D Printer Kits – LI YU SZ Reprap Prusa i3 DIY Kits Automatic Leveling Melzi Marlin Firmware with Free Rolls Filament Gift

DIY 3D printer kit design and rigid quality control standards deliver high quality products at fair prices. No matter you are Professional, Maker, Designer, or Hobbyist etc.,you can assemble your own personal 3D printer by your own hands and create something unique by yourself
Excellent Quality Performance: LCD screen to display; ustomized good quality extruder;4 stars lead screw brass nut & high import lead rod; high quality step motors(without interruption for 1000 work hours);updated main board, more function support; high quality power supply; free 3D filament and spool holder along with the 3D printer package.
Worry Free Customer Service: Buy with confidence. we have professional technical engineer to solve the problems you may face when using the 3D printers.
Package Included:

Auto leveling Standard
All assembly units
All assembly tools
All assembly datasheet (document, picture)
Software
8G SD Card
1 x Masking paper
Free 1 Rolls Filaments
Filaments color : Random color, PLA or ABS net weight 0.25kg/roll
Feature:
Structure: Acrylic Framework
Power Shupply: 110/220V 20A
Output: 12V 20A 240W
Off-line Print: Support
XY Axis speed : 3000mm/min
Printing Speed: 40-120mm/s
Layer Thickness :0.1mm~0.4mm
LED Screen: support
Z Axis speed:200mm/min
Hotbed Temp: 110
Extruder Temp: 170~275
Printing Size: 220x220x240mm
Filament Diameter: 1.75mm
Machine Size: 500x400x230mm
XY Axis Accuracy: 0.012mm
Z Axis Accurancy: 0.004mm
Nozzle size : 0.4mm
Note: install video in SD card, if you have any problem or any special request please contact us first

Product Features

  • Self-leveling, self-cleaning, tetherless printing, and an integrated power supply make powerful 3D printing easy
  • A large build volume of 220 mm x 220 mm x 240 mm enables large prints, or many small prints at once
  • High accuracy printing Operating to easy Support auto level ans off-line print
  • SUPPORT SEVERAL FILAMENTS: Prints PLA and higher temperature ABS, TPU,WOOD,PVA, Nylon,PVA and PP. Print many filaments and not just PLA.

Click Here If You Need More Detailed Info…