2 x T8 lead Screw
- Material – 304 stainless steel
- Compatible with Prusa i3 Printer Z Axis
- Lead Screw Diameter – 8mm
- Lead – 8mm
- Lead Screw Length – 350mm
2 x T8 lead Screw
The difference bettwen CR-10 and CR-10S is CR-10S upgraded with dual Z axies leading screw rod which make printing quality better and more stable.
Another upgrading is CR-10S mainboard with filament monitor function, this function can detect when filament is running out or not.
Printing Size： 300*300*400mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hot bed temperature: PLA: 50
Printing Speed：Normal: 80mm/s, Max.: 200mm/s
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm
Extruder quantity: 1
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter：Standard 0.4mm
Printing Method: SD card(off-line), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: input: 110-240V output: 12V/30a
Hot bed: 4mm aluminum alloy platform, 3mm special tempered glass
Operating Software：CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX
High accuracy bearings and quality parts, it makes the printer much more stable and quiet when printing.
Product Size: 490*600*615mm
Package Size: 540*640*310 mm
Net Weight: 11kg
Gross Weight: 15kg
*HICTOP 3D printer DIY kits (including build plate and tempered glass)
*Dual Z axis
*Spare screws and Wrench kits
*Assembly instructions and user manual.
*SD card 1pcs (the user manual is in SD card)
*0.2kg PLA Filament
Material: stainless steel
Total Length: 500MM
Shaft: 6.35 x 8mm
Nema 17 Stepper motor:
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%
How to install:
1. Pls put screw nut into the Lead screw.
2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.
1x Lead screw
2x Mounted ball bearing
1x Shaft coupling
1x Stepper motor
Lead Screw Length: 330mm
Lead Screw Diameter: 8mm
Coupler Shaft Usage:5mm to 8mm
Pillow Bearing Block Bore:8mm
Net Weight: 191g
1* T8-330mm Lead Screw
1* Copper Nut
2*Pillow Bearing Block
Note: If there have any missing part pls contact us before leaving negative review and we will resend to you, thanks!