Dernord Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement


Product Features

12v 100W Cartridge Heater widely used for 3D printer

From the Manufacturer

The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.

Application

1: Boiling water because of flange

2: Patient Comfort heating used in medical devices

3: Mold die and platen heating

4: Seal bars used in packaging equipment

5: Heating of hot stamps
Technical Details

Tube length: 100mm

Tube diameter: 8mm

Wire length: 32cm

Product Features

  • Cartridge Heater 12v 100w
  • Tube diameter: 8mm (0.32 Inch)
  • Tube length: 100mm (3.94 Inch)
  • Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
  • Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Detailed Information available on our Homepage…

INKBIRD 12″ Stainless Probe NTC-30CM Sensor Thermocouple w/ DC Cord for ITC-1000,ITC-306T, ITC-308S, ITC-310T Thermostat Temperature Controller


Features:
NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
This temperature probe can be submersed into your beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.

Measuring temperature range: -50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions: 6mm x 300mm (0.24in x 12in)
Cord Length (excluding probe): 2m (6.5ft)

Package Included:
1 x 12″ Probe Sensor
1 x 10cm DC Cord cable

Product Features

  • NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
  • It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.
  • The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
  • Can be submersed into your beer direclty during fermentation.
  • Easy to use

Detailed Information available on our Homepage…

Kweiny 3D Printer Extruder Accessories Brass Nozzle 5PCS(0.3/0.4/0.5mm) Stainless Throat with PTFE 1.75mm Tube 2PCS for Makerbot and Stainless Needle for Nozzle Cleaning Kit 3PCS(0.3/0.4/0.5mm)

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts
2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉). You can twist the needle to make it easier to clean up

Specification of nozzle:
Compatibility: 1.75mm PLA or ABS E3D V5/V6 3D printer;
Output diameter: 0.3mm*1PCS, 0.4mm*3PCS, 0.5mm*1PCS;
Input diameter: 1.75mm;
Size: M6;
Material: Brass

Specification of throat:
Compatibility: 1.75mm PLA or ABS E3D V6 3D printer;
Filament diameter: 1.75mm;
Size: upper thread M6, lower thread M7;
Length: 22mm;
Material: Stainless steel and PTFE

Specification of needle:
Compatibility: All type 3D printer;
Size: 0.3mm*1PCS, 0.4mm*1PCS, 0.5mm*1PCS;
Length: 70-75mm;
Material: stainless steel SUS304

Package include: Total: 10PCS
Brass nozzle print head:
0.3MM*1PCS,
0.4MM*3PCS,
0.5MM*1PCS;
Stainless steel throat: 2PCS;
Cleaning needle of nozzle:
0.3MM*1PCS,
0.4MM*1PCS,
0.5MM*1PCS

Product Features

  • Compatibility: Compatible with 1.75mm PLA or ABS E3D V6 makerbot printer;
  • Package Include: Brass nozzle print head 5PCS(0.3MM*1PCS, 0.4MM*3PCS, 0.5MM*1PCS); Stainless steel throat 2PCS; Cleaning needle of nozzle 3PCS(0.3MM*1PCS, 0.4MM*1PCS, 0.5MM*1PCS);
  • Advantage: Cleaning needle of nozzle is stainless steel needle, not drill bits, it is flexibility and elasticity, not easy to be broken. It’s length is long enough, you can clean nozzle deeper. You can also use it to clean any other parts, such as the feed gear;
  • Various specifications: Nozzles are 3 different specifications, they are all Compatible with 1.75mm Input Diameter. You can try different effects;
  • Attention: Small parts, please keep away from children.

Detailed Information available on our Homepage…

Kweiny 3D Printer Extruder Accessories Brass Nozzle 5PCS(0.3/0.4/0.5mm) Stainless Throat with PTFE 1.75mm Tube 2PCS for Makerbot RepRap Stainless Needle for Nozzle Cleaning Kit 3PCS(0.3/0.4/0.5mm)

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts
2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉). You can twist the needle to make it easier to clean up

Specification of nozzle:
Compatibility: 1.75mm PLA or ABS MK8 MK7 makerbot 3D printer;
Output diameter: 0.3mm*1PCS, 0.4mm*3PCS, 0.5mm*1PCS;
Input diameter: 1.75mm;
Size: M6;
Material: Brass

Specification of throat:
Compatibility: 1.75mm PLA or ABS MK8 MK7 makerbot 3D printer;
Filament diameter: 1.75mm;
Size: M6;
Length: 30mm;
Material: Stainless steel and PTFE

Specification of needle:
Compatibility: All type 3D printer;
Size: 0.3mm*1PCS, 0.4mm*1PCS, 0.5mm*1PCS;
Length: 70-75mm;
Material: stainless steel SUS304

Package include: Total: 10PCS
Brass nozzle print head:
0.3MM*1PCS,
0.4MM*3PCS,
0.5MM*1PCS;
Stainless steel throat: 2PCS;
Cleaning needle of nozzle:
0.3MM*1PCS,
0.4MM*1PCS,
0.5MM*1PCS

Product Features

  • Compatibility: Compatible with 1.75mm PLA or ABS MK8 MK7 makerbot 3D printer;
  • Package Include: Brass nozzle print head 5PCS(0.3MM*1PCS, 0.4MM*3PCS, 0.5MM*1PCS); Stainless steel throat 2PCS; Cleaning needle of nozzle 3PCS(0.3MM*1PCS, 0.4MM*1PCS, 0.5MM*1PCS);
  • Advantage: Cleaning needle of nozzle is stainless steel needle, not drill bits, it is flexibility and elasticity, not easy to be broken. It’s length is long enough, you can clean nozzle deeper. You can also use it to clean any other parts, such as the feed gear;
  • Various specifications: Nozzles are 3 different specifications, they are all Compatible with 1.75mm Input Diameter. You can try different effects;
  • Attention: Small parts, please keep away from children.

Detailed Information available on our Homepage…

E-accexpert Stainless Steel Clamp Clip Hot Bed Glass Platform Fixation Fix Clamp Replacement for UM2 Ultimaker 2 3D Printer

E-accexpert Stainless Steel Clamp Clip Hot Bed Glass Platform Fixation Fix Clamp Replacement for UM2 Ultimaker 2 3D Printer

Product Features

  • Material: 304 Stainless steel

Detailed Information available on our Homepage…