MYSWEETY 3D Printer Accessories Kit, 500mm Stainless Steel T8 Trapezoidal Lead Screw KFL08 bearing Stepper Motor Nema 17 For 3D Printer Hobby CNC Router XYZ

Specifications:
Lead screw:
Material: stainless steel
Diameter: 8mm
Pitch: 2mm
Lead: 4
Total Length: 500MM

Shaft coupling:
Material: aluminium
Shaft: 6.35 x 8mm
Length: 25mm
Diameter: 18mm

Nema 17 Stepper motor:
Color:silver+black
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%

How to install:
1. Pls put screw nut into the Lead screw.
2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw.
3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing.
4. Put shaft coupling into the Lead screw beside the Mounted ball bearing.

Package Included:
1x Lead screw
2x Mounted ball bearing
1x Shaft coupling
1x Stepper motor

Product Features

  • Package include: 3D printer accessories kit(1xscrew + 1xstepper motor + 2xball supports + 1xshaft coupling).
  • Lead Screw: Material: Stainless stell; Diameter: 8mm; Pitch: 2mm; Length: 500mm. Mounted Ball Bearing: Material: Zinc alloy; Bore diameter: 8mm.
  • Lead screw mainly used in stepper motor, machine tool, and other equipment. Lead screw without processing, direct connected to bearing.
  • Suitable for industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ module; slider; lifts etc.
  • Large torque, small vibration, high-quality, low noise!

Detailed Information available on our Homepage…

10 Meters 2GT-6 Open Ended PU Timing Belt Width 6mm For RepRap 3D Printer CNC White Steel Core Accessory

Description:

This timing belt is a non-slipping mechanical drive belt. It is made as a flexible belt with and steel core. Reinforce cord ensure the running capability in the driving. It runs over matching toothed pulleys or sprockets, made of rubber and perfect for 3D printers.

Specifications:

Type: 2GT-6,open end

Material: PU, steel
Color: White

Length: 10M / 39.37″

Width: 6mm / 0.23″

Pitch: 2mm / 0.08″

Weight: 127g(approx.)

Package Includes:

1 x Timing Belt

Note:
1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Features

  • Made of PU material and steel core, very flexible and strong
  • Compared with 2GT black belt with glass fiber core, strong steel core wires are joined in this white belt
  • Excellent process and durable, Strong abrasion resistance
  • Low noise, high wear resistance, small production tolerances
  • Suitable for small precision machinery transmission, such as 3D printers, intelligent plotter, etc

Detailed Information available on our Homepage…

Creozone 3D Printer Tool 3D Print Removal Tool Steel Spatula, Professional 3D Printer Accessories

This is Creozone special design removal tool for 3D printing.

Product Features

  • Professional 3D print removal tool
  • Wood grain handle and stainless steel knife
  • This 3D print removal tool can help you easy get the prints off from the build surface
  • Will not scratch build surface
  • Net Weight: 2.4 ounce

Detailed Information available on our Homepage…

2-Pack NEMA 17 Stepper Steel and Rubber Vibration Dampers for 3D Printer, CNC

These vibration dampers are a great motor mount accessory for 3D Printers, CNC, or other hardware that uses NEMA 17 steppers or electrical motors. Installed between your stepper and the mount with the original screws, they will drastically reduce noise and vibration transmitted through the machine. Reduced noise and vibration results in higher 3d print speeds with fewer mechanical artifacts.

Product Features

  • Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer.
  • 1 Damper used per Stepper or Electric motor
  • 3d Printers see a 5-10dB reduction in noise when used on X and Y Axis steppers
  • Works on both Cartesian and Delta style Additive Manufacturing machines
  • Pair these with good filament for the best results in your 3D printer and remove vibration and noise.

Detailed Information available on our Homepage…

0.4mm Drill Bits – 3D Printer Nozzle Cleaning Kit – Stainless Steel, 4.1″ Length (5-Pack)

Package Included: 5 x 0.4mm Needle Drill Bits.

Product Features

  • Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.)
  • Bit diameter: 0.4mm; The bit length:7.5cm; The length of shank: 3cm; Total length: 10.5cm. Material: Stainless Steel.
  • Good toughness and not easy to break off.
  • Package Included: 5 x 0.4mm Needle Drill Bits.
  • 30 DAY MONEY BACK GUARANTEE – All PAGOW customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfied for any reason.

Click Here If You Need More Detailed Info…