Premium 3D Print Removal Tool Kit with Durable Comfort Handles, Sharp and Hardened Blades for Easy Separation of Prints. Sturdy Knife Spatula 3D Printer Accessories Set of 2 – Enhanced Version


Are you looking for a 3D print removal toolset with
• Solid, riveted handles that won’t come loose and start spinning, twisting or turning after use?
Hardened stainless steel blades that are optimally flexible without being too flimsy and/or getting scratched and gouged by the print bed surface due to their softness?
• A knife tool with a sharpened front edge (flat bottom) for getting under even the most-adhered prints with ease?
• Ability to reach into the back under larger parts, sweep across and lever them off, as well as handle smaller, more delicate objects?
Durable comfort handles with grips designed for a firm hold that feel good in the hand and look stylish too?
Safe, rounded blades easier on your fingers, prints and printer surface?

REPTOR 3D Print Removal Tools have been designed with all these aspects in mind.
These tools are not your average repurposed painters putty knives with cramp rings that come loose or fall apart before long when used to remove 3D prints!

This REPTOR toolset is designed to get even the most stubborn prints off the bed without distorting them or damaging the print bed surface. Both handles have solid rivets in them that will hold the blades in place and will not permit the blades to turn or yield. The knife with its 4.92″ blade and beveled front edge can be used to sweep across and reach into the back under larger parts and provide leverage to pop even a stubborn piece up while the spatula is thin and flexible enough to get under even the most delicate of objects without distorting them.

They are the perfect duo – practical and durable, yet comfortable and stylish! Get yours now!

Product Features

  • Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed palette spatulas with spinning, twisting and turning cramp rings!
  • Long knife with a beveled front edge; Slides gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying
  • Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them
  • Stylish and useful; The smaller offset spatula has a black rubber comfort grip, the knife has a big thick wood handle
  • Essential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed

Detailed Information available on our Homepage…

3D Printer Tool Kit – 6pcs Brass Extruder Nozzle Print Heads|6pcs Cleaning Drill Bits|1M PTFE Tube | 6pcs Extruder 30mm M6 Tube – Premium 3D Printer Parts and Accessories

This 3D Printer tool kit will make your 3D printing/DIY easy and the printed results spectacular.

Specification of Extruder Tube:

Type : Nozzle Throat

Compatibility : 3D Printer

Outer Thread : M6

Nozzle Throat Outer Diameter:7mm

Nozzle Throat Inner Diameter:4mm

Teflon Pipe Inner Diameter : 2mm

Length : 30mm

Filament Diameter : 1.75mm

Material : Stainless Steel

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head

Color: Golden.

Material: brass

Size: 5*13mm

Input Diameter: 1.75mm

Output Diameter: 0.4mm

Specification of drill kit:

Type :Drill kit

Material: silicone

Bit diameter: 0.4mm

The bit length: 8mm

The length of shank: 20mm

How to use the Cleaner Drill Bits:

1. pull out the nozzle head.

2. heating the nozzle head to consumptive material melting temperature (around 200 200 degrees) 3. use the cleaner kit to Drill In (not insert directly which would break the drill bit)

4. when you put the drill bit out of the nozzle head, if there is something like yellow sticky jelly stick on the drill bit (which is very sticky on hand), please replace the nozzle head directly. This is because impurities inside the consumptive material melt, which become a layer of mucus stuck in the nozzle head. Normally you can’t clean them up with the drill bit. So you might need to replace the nozzle throat.

Attention: Small parts, keep away from children

Package include

6 x 3D Printer Extruder Tube

6 x 0.4mm Brass 3D Printer Head

3 x Nozzle Cleaning Kit / Drill Bits

1 x 2M PTFE Tube

Product Features

  • [3D Printer Extruders] 2mm ID X 4mm OD, M6 30mm Nozzle Throat, made of Teflon PTFE core and 304 stainless steel material;
  • [Brass Nozzle Print Head] High quality Copper (brass)material, for MK8 Makerbot Reprap 3D Printers.The size is 12.5x7mm, Output Diameter is 0.4mm and Input Diameter is 1.75mm;
  • [Cleaning Drill Bits] Made of high carbon steel and treated with nickle-iron alloy. Diameter is 0.4mm * Length 8mm. The length of shank is 20mm, great for 3D Print cleanup.
  • [PTFE Teflon tubing] 2mm ID X 4mm OD, made of Teflon PTFE core and 304 stainless steel material.
  • [Compatibility] Compatible with all 1.75mm PLA ABS 3D printer, suitable for E3D V6 1.75mm Extruder.

Detailed Information available on our Homepage…

Kweiny Drill Bit ( Needle ) for 3D Printer Makerbot | Extruder Nozzle Cleaning Tool Kit | Flexible Steel Material Not Easy to Be Broken | 5PCS Diameter Specification 0.2mm 0.3mm 0.35mm 0.4mm 0.5mm

1. Each needle has a label that marks the diameter of it. To make it easier to clean up, you can use a small diameter needle first and then use a needle with the right diameter;
2. Don’t use the needle to clean until the nozzle is heated to above 200℃(392℉). You can twist the needle to make it easier to clean up;
3. After replace the nozzle, you’d better recalibrate the distance between nozzle and plate to ensure the quality of print parts;
4. Size:
total length: 70mm/2.76in;
Needle length: 40mm/1.57in;
Handle length: 30mm/1.19in
5. Sharp parts, please keep away from children.

Product Features

  • Compatibility: Matches all 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
  • Quantity and size: 5PCS in total, 1 pieces per specification, diameter specifications 0.2mm 0.3mm 0.35mm 0.4mm 0.5mm
  • Widely used: It can be used to accurately measure the diameter of nozzle holes. You can precision clean all of small size nozzles and other small parts by the tool kit, such as the feed gear. You can also use 0.5mm needle to clean holes in larger diameter
  • Material: SUS304 stainless steel, it’s flexible and doesn’t break easily. It comes with a handle, so you can easily twist it in during use
  • Durability: It can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used

Detailed Information available on our Homepage…

CCTREE 3D Printer Nozzle Cleaning Kit Drill Bits Tool For Makerbot And Creality CR-10 MAKERBOT 10 PCS (0.2-0.6mm)

Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm
10Pcs(0.2-0.6mm):2×0.2mm,2×0.3mm,2×0.4mm,2×0.5mm,2×0.6mm
Type : Extruder Nozzle Drill
With storage box
Used for 3D Printer nozzle

Tip:
Please clear the nozzle when heated to 200 °C while using the drill

Package Included:
10pcs x nozzle drill

Product Features

  • Material: Stainless Steel.
  • Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm
  • 5 different size (each size 2pcs)
  • Used for 3D Printer nozzle
  • Package Included: 10pcs x Nozzle Drill

Click Here If You Need More Detailed Info…

RexBeTi RBDC02 Electronic Digital Caliper Inch/Metric Conversion 0-6 Inch/150 mm Stainless Steel Rugged Body Gauge Micrometer, Perfect for 3D Printer, Woodworking, Hobby Measuring Tool

RexBeTi – A professional brand, Which only produce the BEST QUALITY tools to improve the quality of life

What is a Great Caliper?
● Quality Guarantee
● Easy to use
● Dead-on accurate and built to last
● Heavy feeling and Smooth operation
● Returns to zero every time
● Save your time ( Inch/Metric Conversion )
● Along with a solid protecting case

RexBeTi Digital Caliper – A Precision Companion for Your Life

Why Choose RexBeTi RBDC02 All Stainless Steel Digital Caliper
● 2 Years Warranty, 30 Days money back Guarantee
● Large and easy to read LCD display, more easier and convenient than dial caliper
● Precise measurements(Resolution: 0.0005″/0.01mm), Meet your accuracy requirements anytime, Perfect for 3D printing, woodworking, Jewelry working, ammo measurements and hobby DIY
● All stainless steel rugged body, Heavy feeling beyond imagine
● Glides smoothly, works just as good as one costing 10x price
● Repeatable accuracy for everyday use, returns to zero every time
● Inch/Metric Conversion which will definitely save your time
● Automatic on-off
● Along with a black hard case and extra battery

What you will get in the packge?
● 1 x Digital Caliper in solid case
● 1 x Extra Battery
● 1 x RexBeTi User Manual
● 24 Hours Customer Service
● 2 Years Warranty

Product Features

  • BEST BANG FOR THE BUCK – It’s not a caliper with a price tag of $200, But it will do the $200 work
  • GLIDES SMOOTHLY – All stainless steel body, no burrs or pits left from forging, the motion is extremely smooth and precise
  • OUTSTANDING FINISH QUALITY – Stainless steel jaws by fine polish, Heavy feel beyong imagine, Overall sturdy construction
  • PRECISION MEASUREMENTS – Resolution: 0.0005″/0.01mm, A must have precision tool for 3D printing, Home DIY, Guitar building or other accurate measurements
  • RIGHT ON YOUR MONEY – All stainless steel build, Rugged body, Smoothly glides, Exact measurements, That’s a great caliper you’re looking for

Click Here For More Information