Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
2 x teflon tube within 1.75mm stainless steel nozzle throat

Product Features

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1×0.3mm/1×0.4mm/1×0.5mm), 4 pcs brass volcano extruder print head(1×0.6/1×0.8/1×1.0/1×1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat

Visit The Website For More Information…


  • DotScott1

    Perfect for PLA! Also: View photos for my 0.8mm Simplify3D profile / settings 🙂 Gotta say, I’m really impressed with the quality and price of this kit. I was about to drop almost $100 on the original kit but decided I would try a clone and just thought, “Hey, if it doesn’t work, big deal, it’s cheap.” But to my surprise… it works… and it works well :)I haven’t tried these nozzles or this kit on anything but PLA (since PLA is all that I print with) but I can say that for PLA, it’s perfect. I’ve had it up…

  • Stephen E.

    Good replacement hotend I bought this to replace a similar (cheaper) all metal hotend I had purchased a year ago that ran into some jamming problems. This one seems better quality and has a proper connection between the heater block and the heatsink that maintains a bit of distance between the two and also allows the Teflon tubing to seat inside the connector instead of just being jammed up against it. This should help reduce the amount of jams that occur. It is also nice to have a spare on hand that can…

  • Michael Scott


Leave a Reply

Your email address will not be published.