WINSINN Chimera Hotend Extruder Full Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament
►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))
►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.
►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle
►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►2 x High quality Standard V6 + Volcano +Copper heater block
►2x TC4 titanium alloy + PTFE Teflon Heat Break
►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings
►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM
►2 x Allen wrenc
- Can extrude 2 different filaments at the same time!
- TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
- 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
- High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
- Made by WINSINN