MakerHawk 4pcs TL-Smoother Plus Addon Module 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Pinter Motor Drivers Terminator Reprap MK8 I3

Description:
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. You will got smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988/2 drivers.

Parameter:
Size: 48mm * 25.3mm * 7.6mm(1.89inch * 1inch * 0.29inch)
Weight: 0.02kg(0.04lb.)

Features:
1. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.
2. Lower vibration lower noise smoother result.
3. All the boards adopt a patch diode with a strong consistency, the signal is more stable and the service life is longer.
4. How to use: Connect this TL-Smoother Module to the motherboard’s corresponding drive socket and motor.
TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Package Including
4 * 3D Printer TL-Smoother
4 * DuPont Lines

Product Features

  • TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs
  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.
  • We have a strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Detailed Information available on our Homepage…

2 comments

  • Anonymous

    Works Great in my Ender 3 I installed these TL-smoothers into my Ender 3 and it served to reduce the amount of jerk that the servos exhibited. Now I can print without jerk control and I don’t get belt slippage. It was really easy, and there was plenty of room in the control box to house all the TL smoothers. This is a great upgrade for an inexpensive printer, making it print with less artifacts as it extends the life of the servos/belts. All the parts which were necessary came with the smoothers, so I didn’t have to rig…

  • Anonymous

    A must have! Used these smoothers for some stepper motors on one of my 3D printers. Wasn’t expecting huge improvements as far as reducing vibrations in my prints, but ended up with some pleasant results. My motors are running at cooler temperatures (~8-10 C°) which is drastic! They’re producing less noise during movement and I have been able to run the motors faster without all of additional vibrations that can transfer into print quality. I would highly recommend these to anyone 3D printing with ghosting…

Leave a Reply

Your email address will not be published.