Anycubic POT015 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/ 500G-White (Bottle Random)

Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: WhiteMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.

Product Features

  • Specifically designed for led light source to achieve better printing quality
  • Rapid prototyping. The resin has been developed to reduce the forming time
  • Strong adhesion. The adhesion has been improved for higher print success rate
  • Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT015 and fine printing details
  • Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment

Check Out Our Website For Details…

2 comments

  • Anonymous

    Too expensive…

  • Anonymous

    great resin, awful metal bottle!!! so this Resin is absolutely amazing with the photon! my only and BIG beef is the metal bottle it came in. I really like the plastic bottles. but this metal one I got is just messy!! (See in photo) For some weird reason it leaks when Im not using it. I had used it once and the lid seemed pretty clean before I closed it. came by a couple days later and there was a large pool of resin at the base of the bottle. The plastic ones do not do this. and they are much easier to clean if resin does drip…

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.