Category Archives: 3D Printing Accessories

3D Print Head Extruder 0.4mm Extruder Single Nozzle Accessories with Terminal Interface Board for 3D Printer

Motion shaft speed: 40 mm / sNozzle flow rate: about 24cc / hWeight:400GNote:There are two different voltages of Heating Nozzle, 12 v and 24 v.Don’t access the 12 v into 24 v!!!Operating temperature is 190℃–230℃, Maximum temperature can`t exceed 280℃ or the device might overburningWhat`s in box?1* 3D printer head Product Features Nozzle: 0.4mm Printed materials: ABS PLAABS PLA K-type thermocouple Material diameter:1.7M with Terminal Interface Board Detailed Information available on our Homepage…

Read more

Getech J-Head Hot End Hotend 0.35mm Nozzle for 3mm filament 3D Printer Reprap Prusa Mendel

This J-Head Hot End is designed based on other nozzle. It’s very simple by reducing the number of custom machined parts to a bare minimum. The J-Head Hot End can easily and well interface with the most popular RepRap extruders. The filament path is same with teh one of an already proven design, it can be used to print reliably with both ABS and PLA. If using PLA, it requires a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle […]

Read more

The Cube® Home 3D Printer (2nd Generation, Blue)

3D Printers, 3D Systems, Inc., Cube Printer 2nd Gen Blue, 385000 Product Features Plug and play simplicity. Voted MAKE magazine’s “easiest to use” and “most reliable” 3D printer. Straight out of the box – you can get started immediately with the Cube’s simple setup. Just plug it in and start. The only 3D printer certified for safe at-home use by adults and children. Print in ABS and PLA. Now the Cube prints in two materials. Not only in strong recyclable ABS, but also compostable PLA. Print in […]

Read more

3M Squeegee for Kapton or Blue Tape Application to 3D Printer Build Platforms

4″ x 20-3/4″ squeegee ideal for applying kapton tape and blue painters tape to 3D printer build platforms. Can also be used to apply ink to a screen printing screen. Not ideal for applying vinyl. Product Features Use to apply kapton and blue painters tape to 3D printer build platorm Use to apply ink to screen for screen printing 4″ x 20-3/4″ Not ideal for applying vinyl Detailed Information available on our Homepage…

Read more

RioRand™ 1.75mm PLA Filament 1kg/2.2lb for 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle etc. (Purple)

This RioRand filament is another popular plastic filament for home printingcomes coming with vacuum package, with no oily residue and no air bubbles. The plastic is great quality, and no kinks or breaks. Best choice for perfect printing. Features The diameter of hole is 3.8cm, widespread used in 3D printers such as Reprap,MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2 and UP!(Afinia H-Series). The diameter stays stable and consistent and filament holds exceptionally toght tolerances.It loads and unloads perfectly. Widely used in health care, education, toys, building, automobile, electronics, and anime […]

Read more
1 192 193 194 195