Tag Archives: Control

WitBot TMC2208 V2.1 New Upgraded  Silent Stepper Motor Driver Suit MKS GEN V1.4 / MKS GEN L/SKR Control Board for 3D Printer Parts(Pack of 5pcs)

1.Work mode: PASS / DIR / UART1.PASSO / DIR Mode: 2. advantages of the UART 2 modes:1)The motor current can be arbitrarily set by the firmware;2)Micro-can be arbitrarily set by the firmware (up to 256 real micro-The real and interpolated micro-can be combined to get the maximum torque;3)The firmware can dynamically switch the stepper motor between stealthChop2 and spreadCycle mode via the UART;4)When the motor is not moving, the standby current motor can be dynamically reduced (via the UART) Note:1.Hardware selection When using the UART operating mode, […]

Read more

3D Printer Motherboard Reprap RAMPS-FD Shield Ramps 1.4 Control Board Compatible for Arduino Due 3D Printer Controller – Quarkscm

Features:CPU operates at 3.3V, has an absolute max of 130mA.High-current IO pins are capable of 15mA source, 9mA sink; Low-current IO pins capable of 3mA source, 6mA sink.The Due has 1 dedicated SPI port, and 4 multipurpose USART/SPI ports. The SPI port is only routed to the 6 pin header used for ICSP on Mega, but this is not used for ICSP on Due.12V and 24V power for option. Computing faster and flash, sram bigger than mega2560. Larger driving power than Ramps 1.4.The Due does not have […]

Read more

LEVILUNA 16 Colors Remote Control Magnetic Levitating Moon Lamp, 7.1″/18cm Diameter, Unibody Seamless 3D Printing, PLA Material, Floating LED Decorative Table Lamp

LEVILUNA Magnetic Levitating Moon Lamp NOTICE Read the Instruction Carefully! At First, It Would Be Pretty Difficult to Mount The Lamp Onto the Balance Point. Keep Calm, Just Treat It As a Game. If You Fail Many Times, Take A Break and Watch Our Guiding Video. After A Few Successful Tries, You Will Be Practiced.Balance Point. It Is Not Suggested to Use Them. Parameters: Magnetic Force > 3N Levitation Height : 8-12mmLight Power : 1W Suggested Working Temperature : 0 ~ 40°C Suggested Working Humidity: 10%~90%RH Base […]

Read more

Prusa I3 A Pro With 3-in-1 Control Box 3D Printer DIY Kit 1.75mm 0.4mm Nozzle

This Prusa I3 A pro 3D printer is streamlined and optimized based on the previous Geeetech Prusa Aluminum I3 3D printer. This Prusa I3 A pro has the following features. 3-in-1 3D printer control box: As you can see, the most obvious modification is that we add a 3-in-1 3D printer control box for this Prusa I3 A pro which gathers the motherboard, power supply and LCD Cpanel in one box, saving the space taken by the printer and bringing you a neat and organized desktop, most […]

Read more
1 2 3 16