Tag Archives: Driver

WitBot TMC2208 V2.1 New Upgraded  Silent Stepper Motor Driver Suit MKS GEN V1.4 / MKS GEN L/SKR Control Board for 3D Printer Parts(Pack of 5pcs)

1.Work mode: PASS / DIR / UART1.PASSO / DIR Mode: 2. advantages of the UART 2 modes:1)The motor current can be arbitrarily set by the firmware;2)Micro-can be arbitrarily set by the firmware (up to 256 real micro-The real and interpolated micro-can be combined to get the maximum torque;3)The firmware can dynamically switch the stepper motor between stealthChop2 and spreadCycle mode via the UART;4)When the motor is not moving, the standby current motor can be dynamically reduced (via the UART) Note:1.Hardware selection When using the UART operating mode, […]

Read more

BIQU 3D Printer Part SKR V1.1 32-Bit with ARM CPU Control Board Open Source Smoothieboard Support TMC2130 TMC2208 Driver 12864 LCD

product Parameter Microprocessor: ARM Cortex-M3 CPU Input voltage: DC12V-DC24V  5A-15A Motor Driver: Supports TMC2208, TMC2130, LV8729, DRV8825, A4988 Etc., can be externally connected to the motor drive Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance) Display: 2.8 inch TFT, 3.5 inch TFT,LCD12864 PC communication interface: square USB, easy to plug and unplug, communication baud rate 115200 Support file format: G-code Support machine structure: XYZ, […]

Read more

Contifan 3D Printer Kit MKS GEN 1.4 Board 12864 LCD Limit Switch 4988 Stepper Driver

Features:A4988 is suitable for driving stepper motor less than 8V-35V 2A.The adjustable potentiometer can control the maximum current output, thus achieving higher step rate.Automatic current attenuation mode detection / selection.Overheating shutdown circuit, undervoltage lockout and cross current protection.Short circuit protection and short circuit protection. Descriptions:The circuit board is made of high quality 4 laminate and specially designed for heat dissipation.Using high quality MOSFET tube, heat dissipation is better.12864 built-in encoder, can realize parameter adjustment and file selection printing. Specifications:Material: plastic and metal Size: 143*84*15mmColor: multicolor Package included:1 x MKS GEN 1.4 Board1 x 12864 LCD 6 x Limit Switch5 x 4988 Stepper Drivers6 x Connect Cables5 x Heat sink1 x USB Cable  Notes:1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks! Product Features A4988issuitablefordrivingsteppermotorlessthan8V-35V2A. Theadjustablepotentiometercancontrolthemaximumcurrentoutput,thusachievinghighersteprate. Automaticcurrentattenuationmodedetection/selection. Overheatingshutdowncircuit,undervoltagelockoutandcrosscurrentprotection. Shortcircuitprotectionandshortcircuitprotection. Click Here If You Need More Detailed Info…

Read more

ACT 3PCS Nema 23 CNC Stepper Motor+3PCS Motor Driver DM542+3PCS Nema 23 Motor Bracket with Screw+2PCS power supply 350w-36v+1pc 6Axis Interface Board with cable for 3Dprinter/ CNC DIY

 Motor Specification: – Model No: 23HS8840-Y – Motor Type: Nema 57 Hybrid Stepper Motor – Step Angel: 1.8° – Rate Voltage: 2.24/3.2/4.48(V) – Rate Current: 5.6/4/2.8(A) – Phase Resistance: 0.8±10%(ohms) – Phase Inductance: 1.8±20%(mH) – Holding Torque: 220/150/220(N.cm.Min) – Detent Torque: 7(N.cm Max) – Rotor Inertia: 530(g.cm2) – Motor Weight: 0.15(kg) Mechanical Dimensions: – Frame Size: 56.4mmX56.4 mm – Body Length: 80 mm – Shaft Diameter: 8 mm – Shaft Length: 21 mm – Lead: 8wires – Lead Length:600mm Connection: Blue(A+), Red(A-), Brown(B+), Black(B-), Yellow(C+),Green(C-),Orange(D+),Write(D-)   Driver […]

Read more

Nozzle Replacement Tool for MK10 M7 3D Printer Change Tool Screw Driver Spanner Wrench Sleeve

No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world! HOW TO REPLACEMENT NOZZLE Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 180-220, ABS: 240-280). Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don’t touch by hands!!! Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, […]

Read more
1 2 3 20